PROFI-DOM — construction company +7 (707) 068-88-68
ENRUKZ

Facade window glazing in Almaty


from 25 000 tenge.* per m²
CALCULATE THE COST OF GLAZING

Draughts and condensation near the glass are the scourge of panoramic windows. We install a profile with a 24–34 mm thermal break, it serves for 30–50 years.

  • Warm profile for
    frosts down to −30 °C
  • House of 100 m² —
    installation in 7–10 days
  • 5-year warranty on
    installation
  • i-glass will pay for itself
    in 2–3 winters

Facade window glazing in Almaty

from 25 000 tenge.* per m²

Draughts and condensation near the glass are the scourge of panoramic windows. We install a profile with a 24–34 mm thermal break, it serves for 30–50 years.

Warm profile for
frosts down to −30 °C

House of 100 m² —
installation in 7–10 days

5-year warranty on
installation

i-glass will pay for itself
in 2–3 winters

Facade window glazing in Almaty

from 25 000 tenge.* per m²

Draughts and condensation near the glass are the scourge of panoramic windows. We install a profile with a 24–34 mm thermal break, it serves for 30–50 years.

Warm profile for
frosts down to −30 °C

House of 100 m² —
installation in 7–10 days

5-year warranty on
installation

i-glass will pay for itself
in 2–3 winters

Types of facade
work we do

Facade insulation

Plastering the walls

Brick cladding

Siding installation

Construction of ventilated facades

Facade painting

Stone finishing

Facade repair

Installation of facade panels

Installation of flashings and reveals

GET A CONSULTATIONWe will call you back within 3 minutes

Types of facade
work we do

Facade insulation

Plastering the walls

Brick cladding

Siding installation

Installation of flashings and reveals

Facade repair

Facade painting

Stone finishing

Installation of facade panels

Construction of ventilated facades

GET A CONSULTATION

We will call you back within 3 minutes

Types of facade
work we do

Facade insulation

Plastering the walls

Brick cladding

Installation of facade panels

Installation of flashings and reveals

Facade repair

Construction of ventilated facades

Facade painting

Stone finishing

Siding installation

We will call you back within 3 minutes

COST OF FACADE GLAZING in
Almaty

SERVICECOSTTIME
Specialist visit for a survey and consultationfree of charge—
Minimum order valuefrom 100 000 ₸—
Stick curtain wall facade glazingfrom 45 000 ₸/m²from 10 days
Structural facade glazingfrom 60 000 ₸/m²from 14 days
Non-insulated glazing with aluminium profilefrom 25 000 ₸/m²from 5 days
Thermal glazing with aluminium profilefrom 38 000 ₸/m²from 7 days
Panoramic glazing for a private housefrom 40 000 ₸/m²from 7 days
Installing an aluminium entrance groupfrom 180 000 ₸/pcfrom 3 days
Replacing glass units in a facade systemfrom 15 000 ₸/m²from 1 day
Sealing facade glazing jointsfrom 1 200 ₸/linear mfrom 1 day
Removing old glazingfrom 3 000 ₸/m²from 1 day
LEAVE A REQUESTWe will call you back within 3 minutes

Преимущества ОСТЕКЛЕНИЯ ФАСАДА ОТ Profi‑Dom

Thermal break 24–34 mm

The polyamide insert in the profile retains heat — joints do not freeze and do not leak condensation in winter

Load calculation

We calculate wind, snow and temperature loads and select the profile section for the opening

Energy-saving glass

Double-glazed windows with i-glass and argon pay for themselves in 2–3 heating seasons

Installation from 5 days

Cold glazing — from 5 days, warm — from 7, post-and-beam — from 10 days under the contract

Installation
warranty 5 years

5 years warranty on installation and seam sealing; aluminum system service life — 30–50 years

From 25 000 ₸ per m²

Cold — from 25 000 ₸/m², warm — from 38 000 ₸/m², panoramic for a house — from 40 000 ₸/m²

LEAVE A REQUESTWe will call you back within 3 minutes

Преимущества ОСТЕКЛЕНИЯ ФАСАДА ОТ Profi‑Dom

The polyamide insert in the profile retains heat — joints do not freeze and do not leak condensation in winter

Thermal break 24–34 mm

We calculate wind, snow and temperature loads and select the profile section for the opening

Load calculation

Double-glazed windows with i-glass and argon pay for themselves in 2–3 heating seasons

Energy-saving glass

Cold glazing — from 5 days, warm — from 7, post-and-beam — from 10 days under the contract

Installation from 5 days

5 years warranty on installation and seam sealing; aluminum system service life — 30–50 years

Installation
warranty 5 years

Cold — from 25 000 ₸/m², warm — from 38 000 ₸/m², panoramic for a house — from 40 000 ₸/m²

From 25 000 ₸ per m²

We will call you back within 3 minutes

Преимущества ОСТЕКЛЕНИЯ ФАСАДА ОТ Profi‑Dom

The polyamide insert in the profile retains heat — joints do not freeze and do not leak condensation in winter

Thermal break 24–34 mm

We calculate wind, snow and temperature loads and select the profile section for the opening

Load calculation

Double-glazed windows with i-glass and argon pay for themselves in 2–3 heating seasons

Energy-saving glass

Cold glazing — from 5 days, warm — from 7, post-and-beam — from 10 days under the contract

Installation from 5 days

5 years warranty on installation and seam sealing; aluminum system service life — 30–50 years

Installation
warranty 5 years

Cold — from 25 000 ₸/m², warm — from 38 000 ₸/m², panoramic for a house — from 40 000 ₸/m²

From 25 000 ₸ per m²

We will call you back within 3 minutes

HOW WE WORK

LEAVE A REQUESTWe will call you back within 3 minutes
  1. 01.
    Discussion and estimate

    We clarify the type of glazing, the dimensions of the openings and the heat-related tasks, and immediately give a price guideline — from 25 000 ₸/m².

  2. 02.
    Visit for precise measurements

    The surveyor measures the openings and checks the floors and load-bearing walls to which the frame will be attached.

  3. 03.
    Design and load calculation

    We calculate wind and snow loads, select the profile and double-glazed windows, and work out the wall junction details.

  4. 04.
    Approval of the contract

    In the contract we fix the cost, installation deadlines and a 5-year warranty on installation work and sealing.

  5. 05.
    Manufacturing of structures

    We cut the aluminum profile, assemble the frames and order double-glazed windows exactly to the dimensions of your openings.

  6. 06.
    Frame and glass installation

    We install the posts and crossbars using a laser level, fasten them to the floors with anchors, and install the double-glazed windows on clamping strips.

  7. 07.
    Finishing and sealing

    We seal the seams, install gaskets and finish the junctions to the walls — no drafts or leaks.

  8. 08.
    Handover of the site and cleanup

    Together with you we check the opening of the sashes and the tightness of the seams, and remove the debris. Warranty for installation — 5 years.

Answer 5 questions and get an estimate accurate to 95%

Find out the cost and timing of glazing in 1 minutes

What type of glazing do you need?

What is the glazing area?

What is the object?

Do you have a project or opening dimensions?

When do you plan to start the work?

One last step!

Enter your phone number so we can send you the estimate and reserve your gift!

+7

catalogue of completed facade work

Facade insulation and plastering of a private house in the Alatau microdistrictFacade insulation and plastering of a private house in the Alatau microdistrict
The homeowner wanted to reduce heat loss and refresh the building's appearance. We insulated the facade with mineral wool and then applied «bark beetle» decorative plaster.
1 200 000kzt
VIEW PROJECT
Plinth cladding of a shopping centre on Abay AvenuePlinth cladding of a shopping centre on Abay Avenue
The client needed to protect the building's plinth from mechanical damage and moisture. We used brick-look clinker tiles laid on frost-resistant adhesive.
850 000kzt
VIEW PROJECT
Installation of a ventilated facade on an office building in the Bostandyk districtInstallation of a ventilated facade on an office building in the Bostandyk district
An office building needed to be insulated and clad to improve energy efficiency. We installed the substructure, the insulation and porcelain stoneware slabs.
3 500 000kzt
VIEW PROJECT
Painting and repair of the facade of an apartment building in the Samal microdistrictPainting and repair of the facade of an apartment building in the Samal microdistrict
The management company ordered a facade refresh after the winter — there were cracks and peeling paint. We carried out cleaning, priming and painting of the facade with acrylic paint in two coats.
600 000kzt
VIEW PROJECT

FIND OUT THE COST OF FACADE WORK FOR YOUR PROJECT

Leave a request and we will contact you within 3 minutes

+7

By clicking the button you agree to the terms of the

Or call us at

+7 (707) 068-88-68
Privacy Policy

FIND OUT THE COST OF FACADE WORK FOR YOUR PROJECT

Leave a request and we will contact you within 3 minutes

+7

By clicking the button you agree to the terms of the

Or call us at

+7 (707) 068-88-68
Privacy Policy

FIND OUT THE COST OF FACADE WORK FOR YOUR PROJECT

Leave a request and we will contact you within 3 minutes

+7

By clicking the button you agree to the terms of the

Or call us at

+7 (707) 068-88-68

Остекление фасадов в Алматы от PROFI‑DOM: системы, монтаж, цены

Facade glazing is the installation of translucent structures made of aluminum profile on the external walls of a building. PROFI-DOM performs in Almaty post-and-beam, structural and spider glazing for private and commercial facilities: cold aluminum — from 25 000 ₸ per m², post-and-beam — from 45 000 ₸, warranty on installation — 5 years.

What facade glazing is and where it is used

Facade glazing is a technology for installing translucent structures onto the load-bearing frame of a building, replacing traditional walls and opening up a panoramic view. Let's break down what the system consists of and where it is used in Almaty.

What a translucent system is

The translucent system is based on an aluminum profile — it bears the load from wind and the weight of glass units (20–50 kg/m²). Glass units can be single-chamber (for terraces and winter gardens) and double-chamber (for residential and office buildings) — the difference in the heat transfer coefficient reaches 40%. The joints between the profile and the glass are sealed with EPDM rubber gaskets, which retain elasticity at frosts down to –50 °C. Unlike conventional windows, such a structure covers the entire plane of the facade, providing a panoramic view and natural lighting of the premises.

Where such structures are used

  • Office centres: panoramic facade glazing up to 50 metres high with ventilated transoms for airing without loss of thermal insulation.
  • Shopping complexes: shopfront glazing with high light transmission (up to 85%) and impact-resistant triplex glazing units — they withstand loads of up to 300 kg/m².
  • Private houses: glazing terraces, verandas and winter gardens with sliding or casement aluminium systems — they are not affected by swings in humidity or UV radiation.
  • Administrative buildings: translucent facades with energy-saving glazing units (i-glass with a low-emissivity coating) reduce heat loss in winter by 25–30% compared with ordinary glass.

Advantages of translucent facades

Translucent facades provide natural lighting, reduce the load on the foundation (weight 20–50 kg/m²) and allow any architectural solutions — from strict stick-system to curved spider systems. The aluminum profile does not rust and does not require painting, and a polyamide thermal break 24–34 mm thick keeps heat inside the premises during Almaty frosts. The heat transfer resistance of a quality system reaches 0,6–0,8 m²·°C/W — comparable to a brick wall one and a half bricks thick.

Facade glazing systems: stick, structural, spider

For facade glazing, the price depends on the system, area, and complexity of the facade — we calculate the exact amount after measurement. The main types of facade glazing are stick-system, structural, semi-structural, and spider. Each system has its own features, advantages, and limitations.

Stick glazing — the basic system

Stick glazing is a classic system where the glazing units are fixed in an aluminium frame with visible vertical and horizontal profiles. An aluminium profile with a thermal break 50–80 mm thick forms a load-bearing grid onto which the glazing units are mounted via pressure strips and rubber seals. The inter-floor and expansion joints are closed with thermal inserts — this prevents the joints from freezing in Almaty winters with frosts down to -30°C. The width of the vertical profiles is 50–65 mm and of the horizontal ones 50–130 mm, depending on the wind load and the height of the building. Such a structure gives a thermal resistance of up to 0,6–0,8 m²·°C/W with a double-chamber glazing unit with an energy-saving coating. Thanks to its open frame, the stick system is easier to install and repair — a damaged glazing unit can be replaced without dismantling the neighbouring elements.

Structural and semi-structural glazing — an invisible frame

In structural glazing the glazing units are fixed with a structural sealant, creating a continuous glass surface with no visible profiles on the outside. The glazing units are fixed to the aluminium transoms from the inside with a silicone sealant that takes up wind and temperature loads — its modulus of elasticity is designed for swings from -40°C to +80°C. On the outside the joints are filled with a black structural sealant that polymerises in 7–14 days with an adhesion of 0,5–0,7 MPa. Semi-structural glazing is a compromise: the vertical joints are hidden, but the horizontal profiles remain visible, which lowers the cost of the system by 15–20% compared with fully structural. For the Almaty climate with frequent pressure swings, structural sealing requires a mandatory wind load calculation — at a wind speed above 25 m/s the sealant may peel off if mechanical fixing is not provided every 2–3 storeys.

Spider glazing — point fixing

Spider (point-fixed) glazing is a system where glass units are attached to the load-bearing structure via point fixators (spiders), creating the effect of floating glass. Each glass unit is fixed with 4–6 stainless steel spiders with a hinged connection — this compensates for temperature deformations of the glass up to 3–5 mm per linear meter. Only tempered glass units with a thickness from 10 to 19 mm with mandatory lamination are used — when broken, they shatter into small fragments without sharp edges. In Almaty, spider systems are used for architectural accents — atriums, entrance groups, exhibition pavilions — with a maximum glazing area of up to 6×3 meters per element. Complex installation and tempered glass units make spider glazing expensive, but it provides maximum facade transparency.

Comparison of glazing systems

ParameterStick (mullion-transom)StructuralSpider
Frame visibilityVisibleInvisiblePoint fixings
Price per m²from 45 000 ₸from 60 000 ₸as calculated
Thermal insulationHigh (with thermal break)HighMedium
Installation complexityMediumHighVery high
ApplicationOffices, housesBusiness centresArchitectural accents

Which glazing to choose for a private house

For a private house in Almaty, post-and-beam glazing with a thermal break is optimal — it combines an affordable price, high thermal insulation and the ability to glaze terraces and winter gardens. An aluminium profile of 50–60 mm with a polyamide thermal insert provides a thermal resistance of 0,6–0,7 m²·°C/W. Warm glazing of a terrace with an aluminium profile costs from 38 000 ₸/m², a post-and-beam system — from 45 000 ₸/m²; the structure withstands a snow load of up to 200 kg/m² — sufficient for Almaty winters with precipitation of up to 60 cm. For a winter garden, it is better to choose semi-structural glazing — it lets in more light than post-and-beam glazing, but is cheaper than full structural glazing.

Choosing the profile and glazing units for a building facade

The correct choice of aluminum profile and double-glazed unit affects not only the appearance of the facade, but also its energy efficiency, durability and comfort inside the building.

Aluminium profile with and without a thermal break

For facade glazing in Almaty, an aluminum profile with a thermal break is mandatory — a polyamide insert between the outer and inner parts of the profile prevents freezing and condensation in winter. In systems without a thermal break, the heat transfer coefficient is 2–2,5 times higher — at frosts below -10°C, frost appears on the inner side. Commercial projects in Almaty use profile systems with a thermal break from 24 to 34 mm, which corresponds to the thermal resistance class R ≥ 0,55 m²·K/W. A profile without a thermal break is suitable only for internal partitions and unheated premises.

Types of glazing units for facades

  • Energy-saving: a low-emissivity i-coating on the inner glass with argon filling — for office centres and private houses where thermal insulation matters all year round.
  • Tempered: heat treatment at 700°C followed by rapid cooling, 5 times stronger than ordinary glass — mandatory for shop windows and ground-floor glazing.
  • Triplex: two sheets of glass bonded with a polymer film 0,76–1,52 mm thick — when broken, the fragments stay on the film; it is used in high-traffic areas and in zones of possible impact loads.

How to choose the profile and glazing unit for the Almaty climate

For the climate of the southern capital, the optimal combination is an aluminium profile with a thermal break 1,8–2,5 mm thick and a double-chamber energy-saving glass unit with a heat transfer coefficient (U-value) of no more than 1,4 W/m²·K. With temperature fluctuations from -25°C in winter to +40°C in summer, this combination retains 70–80% of heat indoors in winter and does not let excess heat in during summer. At sites in foothill areas (Kok-Tobe and Gorny Gigant microdistricts), glass units with a selective coating and 20–35% light transmission tinting are additionally used. When choosing glazing for the southern side of a building, preference should be given to tinted or mirrored glass — this will reduce indoor heating in summer by 20–25%.

Profile thickness and load on the facade

The thickness of the aluminum profile for facade glazing ranges from 1,5 to 3 mm, and the weight of 1 m² of glazing is 20–50 kg depending on the type of double-glazed unit. A standard double-chamber 4-12-4-12-4 mm double-glazed unit with an energy-saving coating weighs about 30 kg/m², a 8+8 mm triplex with film — up to 50 kg/m². For buildings up to 20 meters high, a 1,8 mm profile is sufficient; for high-rise objects and wind loads above 0,6 kPa (open areas of the city, hills), 2,5–3 mm is used and the load on the facade's load-bearing structures must be calculated.

Installation and junctions of a translucent facade

Installation of facade glazing is a multi-stage process that begins with a surveyor's visit and ends with the installation of double-glazed windows and sealing of seams.

Stages of facade glazing installation

  • Surveyor's visit: measuring the site, assessing the condition of the load-bearing walls and floors, agreeing the timeframe and the logistics of delivering materials to the site.
  • Design: engineering calculation of loads (wind, snow, temperature), development of junction details, selection of the profile section and the type of glazing unit.
  • Manufacturing: cutting the aluminium profile on CNC machines, milling drainage channels, assembling the frames and preparing the glazing units with argon filling.
  • Frame installation: fitting brackets, mullions and transoms with alignment by laser level, fixing to the floors with anchor groups designed for the calculated load.
  • Installation of glass units: fixation on pressure plates with rubber gaskets, sealing of joints with structural silicone, adjustment of hardware, and checking the opening of sashes.

Can facade glazing be installed in winter

Installation of facade glazing in winter is possible at temperatures down to -15°C, but requires the use of winter sealants and organization of a thermal circuit at the site. In Almaty conditions, where the average daily January temperature is -8°C, work is carried out using alcohol-based silicones that retain elasticity down to -20°C: conventional ones lose it already below -5°C, and in spring, with fluctuations in day and night temperatures, the seams become depressurized. Installation of glass begins after the double-glazed units have been kept for 24 hours in a heated room — this prevents thermal shock and condensation on the inner surface. A thermal circuit (construction heat guns + polyethylene curtain) is necessary at the stage of sealant polymerization: without heating, curing takes 7-10 days instead of 24 hours.

How to check the quality of installation

The quality of facade glazing installation is checked against three parameters: the tightness of the joints (no draughts when the sashes are closed), the verticality of the structure (deviation of no more than 2 mm over 3 metres by laser level) and the absence of chips on the glazing units. A visual inspection begins by checking the evenness of the gaps between the frame and the glazing unit — a difference of more than 1 mm indicates a misalignment during installation. The sashes should open smoothly, without sticking, and the rubber seals should fit against the profile around the entire perimeter. To check the tightness of the joints an anemometer is used: at an outdoor wind speed of 5 m/s a draught of no more than 0,1 m/s is allowed indoors. After installation is complete it is worth taking a thermal image of the facade early in the morning — it will show areas of freezing and cold bridges in the zone where the facade meets the floors, which are not visible on an ordinary inspection.

Installation timelines at different facilities

The installation time for facade glazing depends on the area of the facility: for a house of 100 m² — 7–10 days, for a building of 500 m² — 3–4 weeks, for a high-rise facility from 1000 m² — 2–3 months. The duration is affected not only by the square footage but also by the number of floors: at a facility above 5 floors, time is added for installing scaffolding and safety equipment — at least 3 working days. The complexity of the system also matters: structural glazing is installed 30–40% longer than stick-system glazing due to the need to cure the sealant with each installation of a glass unit. Weather conditions in Almaty adjust the schedule: rainy days in April-May add 15–20% of time for drying the seals, and wind stronger than 10 m/s stops installation at height. Include a reserve of 10–15 days for force majeure in the contract — this will protect you from missed deadlines in case of delayed profile delivery or abnormal weather.

Facade glazing price per m² — table

The cost of glazing work in Almaty depends on the type of system, the volume and the materials chosen. Below are the current prices per square metre and the factors that shape the budget.

Prices per m² by type of glazing system

System typePrice per m² including installationAssembly timeWarranty
Stick (mullion-transom)from 45 000 ₸10–30 days5 years
Semi-structuralas calculated10–40 days5 years
Structuralfrom 60 000 ₸14–60 days5 years
Spideras calculated20–90 days5 years

The price per m² drops as the order volume grows: for projects of 500 m² or more, the cost can be 10–15% lower thanks to bulk purchasing of the profile and glazing units.

What affects the final cost

  • System type: stick is cheaper, structural is 30–40% more expensive because of the complex installation
  • Glazing area: from 500 m² gives a 10–15% discount on materials thanks to bulk purchasing
  • Building height: from 20 meters, renting facade lifts is mandatory — plus 1000–1500 ₸/m²
  • Profile with a thermal break: 15–20% more expensive, but for the local temperature swings from -25°C to +40°C it is mandatory
  • Energy-saving glazing unit: adds 20–25% to the cost but pays off within 2–3 heating seasons

Price of glazing a terrace and a winter garden

Cold glazing of a private house terrace in Almaty costs from 25 000 ₸/m², a winter garden — from 38 000 ₸/m²: it requires a warm profile with enhanced thermal insulation. For the terrace, single-chamber double-glazed units with energy-saving coating are used — they retain heat in winter and prevent overheating in summer. A winter garden requires a double-chamber double-glazed unit 32–40 mm thick and a profile with a thermal break — otherwise condensation on the glass and freezing of corners are guaranteed in January. If you are planning a winter garden, add an extra 15–20% to the budget for reinforcing the foundation under the heavy aluminium frame.

Turnkey facade glazing with PROFI-DOM

Turnkey glazing in Almaty is a full cycle: from measurement and design to installation and warranty service.

What the turnkey service includes

  • Surveyor's visit: free measurement of the site across Almaty and the districts (Aksai, Alatau) — the engineer records the dimensions of the openings, the type of floors and load-bearing walls.
  • Design: engineering calculation of loads on the frame, thermal calculation for the thermal-break profile, drawings of the junctions to the floors.
  • Manufacturing: aluminum profile with a 24–34 mm thermal break, energy-saving 6–16–6 double-glazed windows with argon filling — cutting and assembly according to project drawings.
  • Installation: fitting the stick frame on anchor plates, fixing the glazing units with pressure strips, sealing the joints with Dow Corning silicone sealant.
  • Warranty: 5 years on installation work, post-warranty service — inspecting the seals and replacing the sealant every 2–3 years to extend the service life.

Warranties and service life of facade glazing

PROFI-DOM provides a 5-year warranty on installation work, and the service life of the structure with proper operation is 30–50 years for aluminum profiles and 15–20 years for double-glazed windows. Aluminum profiles with thermal breaks do not corrode and do not fade under ultraviolet light — hence a service life of up to 50 years without major repairs. In an urban climate with sharp temperature changes, double-glazed windows lose their tightness faster: without replacing seals every 3–4 years, their resource is reduced to 12–15 years. After the warranty period expires, we continue to service facilities — we conduct inspections, replace seals and seal joints, which extends the service life of the structure.

Help with glazing permits

PROFI-DOM helps clients obtain permits for glazing in Almaty — we advise on the document package and support coordination with the architecture department. For commercial buildings, an architectural facade plan, load calculations and a seismic expertise conclusion are required — the coordination period is 2–3 weeks if the project does not alter load-bearing walls. For private houses, the procedure is simpler if the structure does not affect load-bearing walls — the exact list of documents is clarified at the akimat's urban planning control department.

Conclusion

Facade glazing is a long-term investment in the architecture and energy efficiency of a building, which, with good design, pays off for decades.

Key takeaways

Such glazing is a modern solution for commercial and private facilities, providing natural lighting, energy efficiency and architectural expressiveness. The choice of system (post-and-beam, structural, spider) depends on the budget, climatic conditions and architectural tasks. For the climate of Almaty, an aluminum profile with a thermal break and energy-saving double-glazed windows are mandatory — this guarantees comfort at any time of the year. The cost of glazing varies from 25 000 ₸/m² (cold aluminum profile) to 60 000 ₸/m² and higher (structural system) depending on the complexity of the system and the scope of work. When choosing a contractor, it is important to pay attention to the availability of a warranty, installation experience in the region and transparency of the estimate. Properly designed and installed glazing serves 30–50 years without loss of operational characteristics.

About the author

Artur Kim

Engineer in translucent structures. Works with the PROFI-DOM workshop in Almaty.

Facade glazing: stick, structural and spider systems, aluminium profile.

Frequently asked
questions about facade work in Almaty

How much does facade glazing cost in Almaty?
The cost depends on the type of system and the complexity of installation. On average, the price per square metre starts from 25 000 KZT for aluminium structures and can reach 60 000 KZT or more for structural glazing with energy-saving glazing units.
What types of facade glazing are there?
The main types are stick, structural and semi-structural, as well as spider (point-fixed) and frameless glazing. The choice depends on the building's architecture and your goals for light transmission and thermal insulation.
How long does facade glazing installation take?
Installation timelines depend on the area and complexity of the site. We install glazing for a private house of about 100 m² in 7–10 days, and a building of 500 m² in 3–4 weeks.
Do you need a permit for facade glazing in Almaty?
Yes, any changes to the facade, including glazing, must be approved by the city's architectural department. We recommend contacting the Urban Planning Control Department of the Almaty akimat to obtain the exact list of documents.
What warranty is given on facade glazing?
We provide a 5-year warranty for facade glazing installation — it is specified in the contract. The manufacturer's warranty applies to the aluminum profile and double-glazed windows.
What problems arise with facade glazing in winter?
The main risks are condensation and freezing of the joints due to improper installation. In Almaty, with its sharp temperature swings, it is important to use quality thermal breaks and professional sealant.
How to choose a facade glazing company in Almaty?
Pay attention to the company's experience, a portfolio of completed projects in the city and customer reviews. Request an estimate with a detailed breakdown of materials and work, and check whether they provide a warranty and maintenance service.
Can I book a surveyor's visit for facade glazing?
Yes. The surveyor comes to the site, takes the dimensions of the openings and assesses the floors — without this, the structure and cost cannot be accurately calculated.
Phone:+7 (707) 068-88-68Our address:Almaty, Makataev St., 47, office 325 (Partner Business Centre)Daily: 9:00–21:00 (by appointment)