
Welder plumber in Almaty
from 3 500 tg.* PER JOINT
A steel riser is leaking, but the plumber doesn't weld steel? One technician will weld and install: joint from 3 500 ₸, turnkey riser — in 4–6 hours.
Welding and installation
by one masterRiser turnkey
in 4–6 hours3-year warranty
on every seamPressure testing at 10
atm in front of you

Welder plumber in Almaty
from 3 500 tg.* PER JOINT
A steel riser is leaking, but the plumber doesn't weld steel? One technician will weld and install: joint from 3 500 ₸, turnkey riser — in 4–6 hours.
Welding and installation
by one master
Riser turnkey
in 4–6 hours
3-year warranty
on every seam
Pressure testing at 10
atm in front of you

Welder plumber in Almaty
from 3 500 tg.* PER JOINT
A steel riser is leaking, but the plumber doesn't weld steel? One technician will weld and install: joint from 3 500 ₸, turnkey riser — in 4–6 hours.
Welding and installation
by one master
Riser turnkey
in 4–6 hours
3-year warranty
on every seam
Pressure testing at 10
atm in front of you
Types of welding
work we do

Replacement of water supply risers

Installation of a heating system

Heating pipe welding

Towel rail installation

Replacement of heating radiators

Repair of leaks and fistulas

Repair of heating boilers

Laying of sewer pipes
Types of welding
work we do








Replacement of water supply risers
Installation of a heating system
Heating pipe welding
Towel rail installation
Laying of sewer pipes
Repair of leaks and fistulas
Repair of heating boilers
Replacement of heating radiators
We will call you back within 3 minutes
Types of welding
work we do








Replacement of water supply risers
Installation of a heating system
Heating pipe welding
Laying of sewer pipes
Replacement of heating radiators
Repair of leaks and fistulas
Repair of heating boilers
Towel rail installation
We will call you back within 3 minutes
Cost of welder plumber services in almaty
| SERVICE | COST | TIME |
|---|---|---|
| Master's visit in Almaty (free for orders from 20 000 ₸) | 3 000 ₸ | from 1 hour |
| Minimum order | from 10 000 ₸ | — |
| Welding of a steel pipe joint | from 3 500 ₸ | from 0,5 hour |
| Welding a pinhole or leak at the joint | from 3 500 ₸ | from 0,5 hour |
| Turnkey replacement of a water supply riser | from 30 000 ₸ | 4–6 hours |
| Turnkey replacement of a heating riser | from 35 000 ₸ | 4–6 hours |
| Installation of a heating radiator with welding | from 12 000 ₸ | from 2 hours |
| Installation of a towel warmer with welding | from 10 000 ₸ | from 1,5 hour |
| Riser above 3 m or through the ceiling | +5 000–10 000 ₸ | — |
| Pressure testing after welding | included in the price | 15 minutes |
| Consultation and estimate | free of charge | from 30 min |
Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom
Pressure testing of every seam
We hold 10 atm for 15 minutes before releasing water — a leak is visible immediately, not at the neighbors below
Master with 12 years of experience
Welds steel with MMA and semi-automatic and installs radiators, valves and towel warmers himself

Riser turnkey in 4–6 hours
Shutdown, dismantling, welding of 4–6 joints, fittings and water start — in one day, by evening
Without dirt and puddles
We lay down film, drain water into a 10–15-liter bucket, and clean up after work
3-year warranty on seams
If a seam leaks during the warranty period, we will re-weld it free of charge, including a repeat visit
Price before work starts
Joint from 3 500 ₸, riser turnkey from 35 000 ₸, free on-site visit for orders from 20 000 ₸
Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom
We hold 10 atm for 15 minutes before releasing water — a leak is visible immediately, not at the neighbors below
Pressure testing of every seam
Welds steel with MMA and semi-automatic and installs radiators, valves and towel warmers himself
Master with 12 years of experience

Shutdown, dismantling, welding of 4–6 joints, fittings and water start — in one day, by evening
Riser turnkey in 4–6 hours
We lay down film, drain water into a 10–15-liter bucket, and clean up after work
Without dirt and puddles
If a seam leaks during the warranty period, we will re-weld it free of charge, including a repeat visit
3-year warranty on seams
Joint from 3 500 ₸, riser turnkey from 35 000 ₸, free on-site visit for orders from 20 000 ₸
Price before work starts
We will call you back within 3 minutes
Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom
We hold 10 atm for 15 minutes before releasing water — a leak is visible immediately, not at the neighbors below
Pressure testing of every seam
Welds steel with MMA and semi-automatic and installs radiators, valves and towel warmers himself
Master with 12 years of experience

Shutdown, dismantling, welding of 4–6 joints, fittings and water start — in one day, by evening
Riser turnkey in 4–6 hours
We lay down film, drain water into a 10–15-liter bucket, and clean up after work
Without dirt and puddles
If a seam leaks during the warranty period, we will re-weld it free of charge, including a repeat visit
3-year warranty on seams
Joint from 3 500 ₸, riser turnkey from 35 000 ₸, free on-site visit for orders from 20 000 ₸
Price before work starts
We will call you back within 3 minutes
HOW WE WORK
- 01.Request and photo
Describe the task or send a photo of the riser — we will call back within 3 minutes and give a price guideline.
- 02.Coordination with the HOA
We will advise how to submit an application to the KSK or management company for disconnecting the riser — usually in 2–3 days.
- 03.Estimate on site
The craftsman inspects the pipes, counts the joints and reinforcement, and gives the price before work begins.
- 04.Approval of the contract
We fix the price, work date and a 3-year warranty on welded seams — in the contract and receipt.
- 05.Shutdown and dismantling
We shut off the riser, drain the water into a container, protect the floor with film and cut off the old pipe.
- 06.Welding a new pipe
We weld a 25–50 mm steel pipe with an MMA inverter and immediately bring out the branches for radiators and valves.
- 07.Pressure testing of seams
We raise the pressure to 10 atm and hold for 15 minutes — if the gauge doesn't drop, the seam is tight.
- 08.Water start-up and cleaning
We open the riser, check the valves and radiators, remove debris — from this date, a 3-year warranty.
Find out the cost of a welder-plumber's work in 1 minutes
catalogue of completed welding work
Replacement of cold and hot water risers was carried out in an apartment in a residential complex in the Samal-2 microdistrict.
A heating system with radiators was installed in a private house in the Koktobe settlement.
Replacement of a toilet and washbasin with connection to the sewerage system was carried out at an office in central Almaty.
Welding of polypropylene water supply pipes was carried out for a new cafe on Abay Avenue.Сварщик-сантехник в Алматы от PROFI‑DOM: стояки, радиаторы, цены
A PROFI-DOM welder-plumber single-handedly handles both steel pipe welding and plumbing installation: replaces risers, runs piping, installs radiators and performs pressure testing without a second specialist. Welding a joint — from 3 500 ₸, turnkey water supply riser replacement — from 30 000 ₸. We travel to all districts of Almaty and give a 3-year warranty on the welded seam.
Published: 15 · Updated: 15
The "two-in-one" master: why you need one
This is a master who simultaneously possesses inverter welding of steel pipes and full plumbing installation: from replacing a riser to connecting a radiator. An ordinary plumber does not weld steel, and a welder does not install — we figure out when a universal specialist is needed.
How it differs from a regular plumber
Our master is skilled in both steel pipe welding (inverter MMA, semi-automatic) and full plumbing installation — from replacing a riser to installing a radiator. An ordinary plumber in Almaty works only with polypropylene, metal-plastic and threaded connections: he can assemble plastic piping, but when he encounters a steel section — he stops. He cannot make a welded joint because he has neither an inverter nor the skill to run a seam on a steel pipe. When replacing a heating riser in an apartment building (and in houses older than 10 years they are steel), you still need a person with a welding machine. By hiring two masters — a welder for the joint and a plumber for the installation — you pay for two visits, coordinate their schedules and lose at least a day.
Why it pays to hire a single specialist for welding and installation
We have one craftsman who does both steel pipe welding and plumbing installation — you get a single warranty for the entire scope of work. When one person does the welding and another does the radiator piping and pressure testing, the boundary of responsibility blurs: if there is a leak at the seam, the welder will say 'the installer didn't tighten the union fitting properly,' and the plumber will say 'the seam leaked.' One craftsman eliminates such disputes because he is responsible for tightness from the first to the last joint. In Almaty high-rises, where access to the riser is often obstructed by built-in furniture or boxes, two craftsmen simply get in each other's way — one stands and waits for the other to finish. In practice, this means that replacing a riser with piping to a radiator takes 4–5 hours instead of 7–8 when hiring separately.
When you need a generalist, not just a plumber
Such an all-rounder is needed when an apartment or house has steel pipes — heating and water supply risers, runs to radiators. An ordinary plumber does not weld steel: his tools are a soldering iron for polypropylene, shears for metal-plastic and a set of spanners. If the risers in the building are steel (and that is most multi-storey buildings in Almaty older than 10 years), you cannot do without welding when replacing or tying in a run — a plastic fitting connected to a steel pipe with a compression joint risks bursting within a year or two because of the difference in thermal expansion between the materials. A welded joint made with an MMA inverter or a semi-automatic welder creates a monolithic connection that lasts for decades without maintenance. If, however, the apartment already has plastic pipework and all risers have been replaced with polypropylene, an ordinary plumber is sufficient.
What the master does — services and works
Our specialist replaces risers, lays out steel pipes around the apartment, installs radiators, towel warmers and connects boilers — all welding and installation work in one pair of hands.
Replacement of a heating and water supply riser with welding
Our turnkey riser replacement includes: shutting off and draining the water, dismantling the old pipe, welding a new steel pipe with outlets for radiators and valves, installation of shut-off valves, pressure testing of each weld seam and starting the water. We work with 25-50 mm pipes and weld with an inverter on direct current — the seam is hermetic and does not require additional caulking. The bypass insertion under the radiator is done immediately so that after startup you can adjust the temperature in the room without shutting off the entire riser. The price includes the master's visit with tools and a warranty on welded joints. Before starting work, we обязательно coordinate the water shut-off time with the KSK or management company so as not to leave neighbors without water overnight.
Distribution of steel water supply and heating pipes
We install steel water supply and heating pipes in apartments or private houses — welding each joint, installing ball valves, coarse filters, and connecting all plumbing fixtures to the main line. For piping, we use VGP pipes (GOST 3262-75) with a wall thickness of 2,8-3,2 mm — they withstand working pressure up to 25 atmospheres and temperatures up to 150 °C. Steel piping lasts for decades, while plastic on compression fittings eventually starts leaking at joints due to aging seals and temperature fluctuations in local networks.
Installation of radiators and towel warmers with welding
Radiator installation from us includes: tying in a welded run to the riser, fitting ball valves and a balancing bypass, mounting the radiator on brackets, connecting it to the steel pipes via unions, and pressure testing the system at 8-10 atmospheres. We work with cast-iron (MS-140), bimetallic (Global, Rifar) and aluminium radiators — for each type we select the brackets and connection layout (side, bottom, diagonal). A heated towel rail is best connected via a welded steel run rather than a flexible hose — a flexible hose often bursts after 2-3 years because of corrosion of the braid, and you risk flooding the neighbours below.
Boiler piping and other welding work
Boiler piping with steel pipes and welding — connecting a gas or solid fuel boiler to the heating system with installation of shut-off valves, a dirt filter, an expansion tank, a safety group (pressure gauge, automatic air vent, safety valve) and pressure testing of the entire circuit. In a private house, a heating welder does not only the boiler piping but also the distribution of heating across floors, connection of underfloor heating circuits through a mixing unit, installation of radiators and towel warmers — the entire cycle of work in one pair of hands without involving a second specialist.
Leak repair and riser replacement with welding and pressure testing
Replacing a riser or repairing a leak in an apartment is a process from shutting off the water to pressure testing that takes from 2 to 6 hours depending on the complexity.
How turnkey riser replacement works — step by step
Replacing a riser with us takes 4-6 hours: shutting off and draining water (30 minutes), dismantling the old pipe (40 minutes), welding a new steel pipe with branches (2 hours), installing shut-off valves (1 hour), pressure testing (30 minutes), and turning the water back on. We perform welding with an MMA inverter on pipes with a diameter of 25–50 mm — МР-3 or УОНИ electrodes provide a dense seam without pores. After welding, we install Bugatti or Valtec ball valves on hot and cold water so that in the future you can shut off water in the apartment without turning off the riser. We pressure-test with a manual hydraulic press — we raise the pressure in the system to 10 atm and hold for 15 minutes: if the gauge does not drop, the seam is sealed. Before starting work, the specialist must coordinate water shutoff with the management company/cooperative — this takes from one to three days, so on the work day we arrive in the morning to finish by evening and not leave the house without water overnight.
Is a permit required to replace a riser in an apartment?
Yes, replacing a heating riser or water pipe requires coordination with the management company/housing cooperative — they give permission for shutdown and access to the basement shut-off valves. Without coordination, shutting off the riser is not allowed — this will result in claims from the management company and neighbors. In Almaty buildings, the management company usually requires an application 2-3 days in advance and a copy of the contract with the contractor. In practice, coordination takes from one to three days if the management company works on schedule — in some housing cooperatives applications are accepted only on weekdays from 9 to 17. Therefore we advise submitting documents at least a week before the planned replacement — this way you will not face downtime if the management company delays its response.
Can a riser be replaced without shutting off the water for the whole building
Yes: replacing a riser requires shutting off water only on your riser — neighbors on it remain without water for 4-6 hours, while neighbors on other risers will not notice the shutdown. Welding under pressure on steel pipes in residential buildings is not used: it is a risky method that does not guarantee seam quality — with the slightest defect, the seam will leak under a pressure of 6-8 atm. In Almaty, such attempts are sometimes made in emergency situations, but we always shut off the riser and perform pressure testing, because welding a leak on a wet pipe is possible, but after a year corrosion at the lack of fusion will cause a new leak in the same place.
Emergency repair of a leaking pipe joint — same-day call-out
If a steel pipe joint leaks, our master goes out on the day of the request — welds the leak with an MMA inverter, pressure-tests the seam at 10 atm, and gives a warranty on the repair. We take a grinder and electrodes to the site to clean the old joint down to metal and apply a new seam over the damaged one — this removes corrosion that has already spread along the pipe. If the leak is on a riser in the basement, the master goes down there and welds: the seam area is dried and cleaned to metal before welding. Sealant or wrapping will not stop corrosion — the leak will return, while welding eliminates its cause.
Equipment and how we work — inverter, semi-automatic welder, pressure testing
The plumber-welder works with his own inverter and plumbing tools. We explain what equipment he uses for welding, how he checks seam quality, and why pressure testing is a mandatory step after every riser replacement.
What equipment the technician uses for welding
Our master uses an MMA inverter for welding thick-walled risers and a MIG/MAG semi-automatic machine for thin-walled pipes — this gives a clean, hermetic seam without pores and cracks. The MMA inverter (manual arc welding with a coated electrode) is the main tool for risers with a diameter of 25–50 mm in old buildings (Khrushchyovkas and panel buildings of Soviet construction): it welds through rust and scale that are inevitable on pipes with a 30–40--year service life. We use the MIG/MAG semi-automatic machine (welding in a carbon dioxide environment) for new thin-walled 15–20 mm pipes when distributing around an apartment — the seam is neater, without slag, and the work speed is 1,5–2 times higher. The semi-automatic machine requires clean metal, so on old rusty pipes MMA remains, while on new distribution MIG/MAG reduces the welding time of one joint to 3–4 minutes.
What pressure testing is and why it is needed
Pressure testing is checking a weld under pressure of 8–10 atmospheres using a pressure test pump: if the weld does not hold pressure, the master re-welds it until tight. For residential houses in Almaty, pressure testing is mandatory according to technical supervision standards — after replacing the cold and hot water riser, the pressure in the system is held for 10–15 minutes, recording a drop of no more than 0,2 atmosphere. Many private specialists skip this stage, citing "experience" or "eye", but without pressure testing a microcrack in the weld may appear a month later — when the water is already on and flooding is inevitable. We pressure test every weld immediately after welding, while the pipe is open — this way there will be no claims from the management company or downstairs neighbors.
How to check the quality of welding after the work
A quality weld is even, free of pores, cracks and overlaps, and of uniform width along the entire length of the steel pipe joint. Visually, the ripples of the weld should be uniform, without dark edges (a sign of overheated metal) and without pits on the surface — such defects are visible to the naked eye under good lighting. After pressure testing the weld must not sweat or drip: if after 10 minutes under a pressure of 8 atmospheres moisture appears at the joint, the weld is defective and the master is obliged to re-weld it. Ask the master to show you the pressure test in your presence — this is normal practice; if he refuses or says “I know it is airtight anyway”, that is a reason to be wary and look for another contractor.
How we work in an apartment — neatly and without flooding
Our technician works with floor and wall protection, drains water into a bucket rather than onto the floor — we leave no dirt or puddles behind, which is critical for apartments with expensive parquet or laminate. Before starting work, we lay thick cardboard or film in the welding area and place a basin or a 10–15-liter construction bucket under the cutting spot so that residual water from the system does not get on the floor. When replacing a riser in a multi-story building, the main risk is flooding the neighbors below: we shut off this riser, drain the water into a prepared container, and only then cut the pipe, and after welding we check every joint with a pressure test without waiting for water to be supplied to the system.
Prices for welder-plumber services in Almaty
We break down pricing for welding and plumbing installation: from the cost of a single pipe joint to a turnkey riser replacement with pressure testing. Below is a price table for a quick budget estimate; the price is fixed and does not depend on the district.
How much does welding one pipe joint cost
Welding one joint of a steel pipe by us — from 3 500 ₸, including edge preparation, MMA or semi-automatic welding, and visual inspection of the seam. The price depends on the pipe diameter: a heating riser of 1-1/4 inches (32 mm) is more expensive than a 1/2-inch (15 mm) branch to the radiator due to the larger volume of deposited metal. Accessibility also matters — working in a cramped bathroom or at height under the ceiling requires more preparation time than an open section in the corridor. In a standard apartment, when replacing a riser, there are 4-6 joints, that is, only for welding — 14 000–21 000 ₸, excluding dismantling and fittings. If a seam on the branch to the radiator bursts, welding it is cheaper than a complete riser replacement, but the cost of the joint will include a call-out — and the total will not fall below the minimum order of 10 000 ₸.
Price list for plumber-welder services
| Labour | What is included | Unit | Price from, ₸ |
|---|---|---|---|
| Welding of a steel pipe joint | Edge preparation, MMA/semi-automatic welding, visual inspection | 1 joint | 3 500 |
| Turnkey replacement of a heating riser | Shut-off, dismantling, welding of a new pipe with branches, installation of fittings, pressure testing | 1 riser | 35 000 |
| Turnkey replacement of a water supply riser | The same + installation of valves on the branches | 1 riser | 30 000 |
| Installation of a heating radiator | Branch pipe tie-in with welding, installation of valves and a bypass, canopy, connection, pressure testing | 1 radiator | 12 000 |
| Towel rail installation | Connection to the hot water riser with welding, installation, pressure testing | 1 heated towel rail | 10 000 |
| Technician call-out | Free for orders from 20 000 ₸ | 1 site visit | 3 000 |
How much does turnkey heating riser replacement cost
Turnkey heating riser replacement from us — from 35 000 ₸, including shutdown, dismantling, welding of the new pipe, installation of branches, installation of fittings, and pressure testing. The amount includes work on a riser up to 3 meters high in a typical apartment — welding of 4-6 joints, insertion of Mayevsky valves and shut-off valves on the branches to the radiators. If the ceilings are higher (new buildings with panoramic windows) or the riser passes through the ceiling, 5 000-10 000 ₸ is added for high-altitude work. When the radiator also needs to be replaced, 12 000 ₸ is added for installation — a total of 47 000 ₸ for the full cycle. This is cheaper than hiring a welder and a plumber separately: two visits at 3 000 ₸ each and two urgency surcharges eat up to 10 000 ₸ without counting the work itself.
Is there a minimum order and call-out fee
Our minimum order is 10 000 ₸, and a call-out within the city is 3 000 ₸ (free for orders from 20 000 ₸). If you need a single joint welded on a branch to a radiator, that is 3 500 ₸ for welding + 3 000 ₸ call-out = 6 500 ₸ — less than the minimum order, so the total is rounded up to 10 000 ₸. For a riser replacement or radiator installation the amount almost always exceeds 20 000 ₸, and the call-out becomes free. For small jobs such as welding on a bracket or sealing a pinhole leak, it makes sense to group several tasks into one visit — that way you pay for the call-out once rather than twice.
Calling a welder-plumber to your home — call-out zone and emergency repairs
We explain how to call a specialist to your home, which districts of Almaty we cover, how emergency call-outs are organised for leaks, and why clients choose a company rather than a self-employed handyman.
How to call a PROFI-DOM welder-plumber
You can call a PROFI-DOM specialist by phone or via Instagram — they arrive at a convenient time, including weekends, with all the equipment from an inverter to a pressure test pump. When placing an order, we clarify the type of work: riser replacement, radiator installation, pipe layout or urgent leak repair, take down the address and find a slot in the schedule. A staff specialist comes out within the day, and in an emergency — within 2-3 hours of the call. On site they assess the scope, agree the estimate and immediately start welding and installation — no second person is needed. When ordering in advance, check whether there is access to the riser and whether the riser is shut off — if the valve is faulty, the specialist will shut it off themselves, but this will add 15-20 minutes to the working time.
Which districts do we cover
We travel to all districts of the city: Alatau, Almaly, Auezov, Bostandyk, Zhetysu, Medeu, Nauryzbai, Turksib — as well as to the private sector within the city and the nearest suburbs (up to 10 km from the city). Travel time within the city is up to 40 minutes; for an urgent leak call, a technician arrives within 2-3 hours from the moment of the call, regardless of the district. To remote microdistricts like Aksai-2, Alatau, Shanyrak and Kalkaman, travel time increases to an hour — take this into account when ordering non-emergency work. If you live in a private house with gas connected, warn the operator: only the gas service or a welder with a permit for gas work can tap into a gas pipe.
Why people choose a company rather than a private individual from OLX
We are a company with in-house craftsmen, not private individuals from OLX.kz: we guarantee the welded seam, perform mandatory pressure testing and take responsibility for the result. A private individual from OLX often gives no guarantee, may not show up on the appointed day or may disappear after receiving the money — especially if the work is complex and requires re-welding defects. A company values its reputation: we have an open Instagram, Kaspi payment and fixed prices without on-site haggling. When you order through a company, you get a receipt, a contract and the craftsman's contact — if the seam leaks a month later, we will re-weld it for free, which you won't get from a private individual who has already deleted the ad.
Emergency call-out for a leak — what to do
In case of a leak, the technician arrives within 2-3 hours, shuts off the riser, makes a temporary plug or welds a new pipe section right on site. Before the technician arrives, shut off the water on the riser (usually the valve in the bathroom or kitchen) — if the valve does not turn or is missing, the technician will bring his own. Do not try to wrap the leak with rags or cover it with cold welding: at a pressure of 4-6 atmospheres this will not stop the flow, but will only soak the walls and floor. Our specialist brings everything necessary: a welding machine, steel pipes of the required diameter, fittings and a pressure test pump to check the seam immediately after welding. If the leak is at the threaded connection of the radiator — the technician will replace the gasket or tighten a new coupling, without welding, but pressure testing is still mandatory to ensure tightness.
Conclusion
We have picked out the main takeaways from the article — they will help you quickly get your bearings when choosing a specialist and not miss important details when replacing pipes or fixing a leak.
Key takeaways
- One craftsman instead of two: he welds heating and water supply risers, then installs radiators, heated towel rails and does pipe distribution throughout the apartment — no need to look for a second specialist.
- When there is a leak, speed matters: every minute of delay increases the risk of flooding the neighbors below and damaging the floor covering.
- Pressure testing after welding is a mandatory stage: it checks the weld under a pressure of 8–10 atmospheres and reveals microcracks invisible to the eye — without it there is no guarantee of airtightness.
- The price depends on the scope of work: a turnkey riser replacement costs more than welding a single joint, and a call-out is 3 000 ₸, free for orders from 20 000 ₸.
- A company with staff welder-plumbers is more reliable: it is responsible for the result and keeps fixed prices, unlike private craftsmen without a contract and receipts.


