
Mobile welder in Almaty
from 2 500 KZT* per metre of joint
Gate broken or pipe burst, but no power outlet? We will arrive within 1–2 hours with our own generator: call-out in Almaty from 2 000 ₸, an hour of work — 3 500 ₸.
Arrival within 1–2 hours on
the day of the call3–6 kW generator:
we weld without an outlet3-year warranty
on every seamHourly rate 3 500 ₸,
payment after the work

Mobile welder in Almaty
from 2 500 KZT* per metre of joint
Gate broken or pipe burst, but no power outlet? We will arrive within 1–2 hours with our own generator: call-out in Almaty from 2 000 ₸, an hour of work — 3 500 ₸.
Arrival within 1–2 hours on
the day of the call
3–6 kW generator:
we weld without an outlet
3-year warranty
on every seam
Hourly rate 3 500 ₸,
payment after the work
Mobile welder in Almaty
from 2 500 KZT* per metre of joint
Gate broken or pipe burst, but no power outlet? We will arrive within 1–2 hours with our own generator: call-out in Almaty from 2 000 ₸, an hour of work — 3 500 ₸.
Arrival within 1–2 hours on
the day of the call
3–6 kW generator:
we weld without an outlet
3-year warranty
on every seam
Hourly rate 3 500 ₸,
payment after the work
Types of welding
work we do

Welding of gates and wickets

Repair of fences and enclosures

Manufacture of canopies and awnings

Welding of greenhouses and hotbeds

Repair of metal stairs

Manufacture of grills and barbecues

Welding of water pipes

Reinforcement of steel structures
Types of welding
work we do








Welding of gates and wickets
Repair of fences and enclosures
Manufacture of canopies and awnings
Welding of greenhouses and hotbeds
Reinforcement of steel structures
Manufacture of grills and barbecues
Welding of water pipes
Repair of metal stairs
We will call you back within 3 minutes
Types of welding
work we do








Welding of gates and wickets
Repair of fences and enclosures
Manufacture of canopies and awnings
Reinforcement of steel structures
Repair of metal stairs
Manufacture of grills and barbecues
Welding of water pipes
Welding of greenhouses and hotbeds
We will call you back within 3 minutes
Cost of WELDING WITH ON-SITE CALL-OUT IN ALMATY
| SERVICE | COST | TIME |
|---|---|---|
| Departure within Almaty (8 districts) | from 2 000 ₸ | 1–2 hours |
| Departure up to 30 km (Kaskelen, Talgar, Otegen-batyr) | from 3 000 ₸ | 1,5–2 hours |
| Travel up to 40 km (Issyk, Uzynagash) | from 4 000 ₸ | 2–2,5 hours |
| Minimum order (callout + 1 hour of work) | from 5 500 ₸ | from 1 hour |
| Hour of on-site work (consumables included) | 3 500 ₸ | 1 hour |
| 8–10-hour shift | 25 000 ₸ | 1 day |
| Welding of steel structures (per metre of weld) | from 2 500 ₸ | from 2 hours |
| Argon welding of stainless steel (per meter of seam) | from 3 500 ₸ | from 2 hours |
| Argon welding of aluminum (per meter of weld) | from 4 500 ₸ | from 2 hours |
| Welding of a heating or water pipe (per joint) | from 3 000 ₸ | from 30 min |
| Repair of gates, wickets or fences (per product) | from 8 000 ₸ | from 2 hours |
| Assessment by photo | free of charge | 15 minutes |
Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom
Arrival within 1–2 hours
We accept urgent calls on the day of the call: within the city — 1–2 hours, to the suburbs — up to 2,5 hours
Mobile welder 10+ years
Welds with electrode, semi-automatic and argon: gates, pipes, canopies, body and muffler

3–6 kW generator with us
We work at dachas, construction sites and garages without a power outlet — the tank lasts 4–6 hours of operation
Weekends with no markup
We go out on Saturday, Sunday and holidays at the same price — we work 7 days a week
3-year warranty on seams
The seam cracked or leaked — we will re-weld it free of charge, including a repeat visit
Payment after work
Call-out from 2 000 ₸, 3 500 ₸ per hour with consumables; pay via Kaspi or in cash upon completion
Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom
We accept urgent calls on the day of the call: within the city — 1–2 hours, to the suburbs — up to 2,5 hours
Arrival within 1–2 hours
Welds with electrode, semi-automatic and argon: gates, pipes, canopies, body and muffler
Mobile welder 10+ years

We work at dachas, construction sites and garages without a power outlet — the tank lasts 4–6 hours of operation
3–6 kW generator with us
We go out on Saturday, Sunday and holidays at the same price — we work 7 days a week
Weekends with no markup
The seam cracked or leaked — we will re-weld it free of charge, including a repeat visit
3-year warranty on seams
Call-out from 2 000 ₸, 3 500 ₸ per hour with consumables; pay via Kaspi or in cash upon completion
Payment after work
We will call you back within 3 minutes
Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom
We accept urgent calls on the day of the call: within the city — 1–2 hours, to the suburbs — up to 2,5 hours
Arrival within 1–2 hours
Welds with electrode, semi-automatic and argon: gates, pipes, canopies, body and muffler
Mobile welder 10+ years

We work at dachas, construction sites and garages without a power outlet — the tank lasts 4–6 hours of operation
3–6 kW generator with us
We go out on Saturday, Sunday and holidays at the same price — we work 7 days a week
Weekends with no markup
The seam cracked or leaked — we will re-weld it free of charge, including a repeat visit
3-year warranty on seams
Call-out from 2 000 ₸, 3 500 ₸ per hour with consumables; pay via Kaspi or in cash upon completion
Payment after work
We will call you back within 3 minutes
HOW WE WORK
- 01.Request and photo
Send a photo of the damage and the address — the dispatcher will call back in 3 minutes and give the price of the visit in the area.
- 02.Selection of a craftsman
We send the nearest available welder with the required equipment: electrode, semi-automatic or argon.
- 03.Arrival at the site
Within the city, the master arrives in 1–2 hours; for a scheduled call — within a 30-minute window.
- 04.Inspection and price
The master inspects the joint and names the price before work begins: per hour, shift or meter of weld.
- 05.Metal preparation
We clean the edges down to metal, cut off rust, and fit the parts on site with an angle grinder.
- 06.On-site welding
We weld without dismantling or evacuation — from a socket or your own 3–6 kW generator.
- 07.Cleaning and priming
We knock off the slag, clean the seams and prime them so the welding spot does not rust.
- 08.Payment and warranty
You accept the work and pay via Kaspi or in cash — from this day, a 3-year warranty on the seams.
Find out the cost of a welder's visit in 1 minutes
catalogue of completed welding work
Welding of gates and a wicket gate at a private house, Alatau microdistrict
Repair of a stair flight in an apartment building entrance, Bostandyk district
Fabrication of a metal frame for a gazebo, country house, Alatau district
Welding of a chain-link fence, dacha area, Nauryzbay districtСварщик с выездом в Алматы от PROFI‑DOM: оборудование, сроки, цены
Сварщик с выездом от PROFI‑DOM приезжает по Алматы и пригороду с оборудованием и бензогенератором — на дом, дачу, стройку или в гараж — и варит ворота, трубы, навесы, кузов авто на месте, без демонтажа и розетки. Выезд по городу — от 2 000 ₸, час работы — 3 500 ₸ с расходниками; срочно — в день звонка, и в выходные.
Published: 9 · Updated: 9
What we do on site: types of welding work at the property
The craftsman brings a welding machine, a generator and an angle grinder — everything needed to work on site without dismantling. Let us list what we weld on the spot — from gates to car bodies, from pipes to canopies.
Gates, fences and wicket gates on the plot
We weld and repair gates, fences, and wickets directly on site — swing, sliding, sectional, with frame reinforcement and hinge replacement. Our specialist arrives at the site with a MIG/MAG semi-automatic welder and an electrode machine to work with both profile pipe up to 3 mm and thick angle on posts. On sliding gates, we most often reinforce the guide beam and replace roller supports — this extends the service life of the system without replacing the leaf. If the gate is skewed or the hinges are loose — it is not necessary to replace the entire structure: on site we reinforce the frame, replace the hinges, and weld the guides.
Heating and water pipes on site
In case of an accident on heating or water supply pipes in Almaty, we come and weld on site — no wall dismantling is required, we drain only the damaged section, not the entire system. Our specialist on site uses a MIG/MAG semi-automatic machine for steel and galvanized pipes — this gives a neat seam without spatter, does not damage adjacent utilities and requires no subsequent cleaning. For heating pipes with a diameter of 32–57 mm, we weld the joint in 15–20 minutes with preheating of the edges so that the seam does not crack during temperature changes.
Canopies, porch roofs, gazebos and greenhouses
We install and reinforce canopies, awnings, gazebos, and greenhouses on the site — welding the frame, attaching to the wall or foundation, installing polycarbonate. The welder brings a welding inverter and an angle grinder for cutting the profile on site — for gazebos we most often use 40×20 mm pipe with a post spacing of 1,5 meters so the structure withstands snow loads up to 150 kg/m². For greenhouses and hotbeds we use thin-walled pipe — the MIG/MAG semi-automatic does not burn through the metal, and the seam comes out airtight.
Car body and muffler on site
We repair car bodies, mufflers, sills, and arches on site — no evacuation needed, welding right in the yard or garage. The welder uses a MIG/MAG semi-automatic with 0,8 mm wire for thin body metal — this produces an elastic seam that does not crack under vibration and does not require additional putty. On mufflers, we most often weld a crack along the can seam or the pipe-to-flange joint — on site in 30–40 minutes, without removing the part.
Mobile equipment and generator: we work without electricity
The welder brings a complete mobile station to the site — the machine, generator and tools. We will tell you what is included in the kit and how the work proceeds where there is no outlet — at dachas, construction sites and garages.
3-6 kW petrol generator — we work where there is no power socket
Our vehicle always carries a 3-6 kW petrol generator — it powers the inverter and the semi-automatic welder on sites without electricity: country houses, construction sites, garages, fields. A 3 kW generator handles an inverter at currents up to 160 A — enough for welding gates, fences and pipes up to 5 mm. Models rated at 5-6 kW run a MIG/MAG semi-automatic welder and a TIG machine at the same time as an angle grinder — without overloading. The generator's tank is designed for 4-6 hours of continuous operation, and refuelling takes 3 minutes. The generator produces a pure sine wave — this matters for the inverter's electronics: the machine does not overheat, the weld is stable and there are no current fluctuations.
What we bring with us: a complete mobile welding station
- Inverter: for welding thick metal — gates, fences, heating pipes, angle bars.
- MIG/MAG semi-automatic welder: for thin metal — car bodies, greenhouses, stainless steel, aluminium.
- Argon cylinder: for TIG welding of aluminium and stainless steel — a neat weld with no scale.
- Angle grinder: for cleaning, cutting and preparing metal on site, and cutting rebar.
- Extension leads and cables: for connecting on site where there is a socket — up to 50 metres from the distribution board.
- Welding helmets and protection: auto-darkening filter, gloves, work overalls — the specialist's safety.
What to do if there is no electricity at the site: step by step
If there is no socket on site, our mobile specialist with a generator solves the problem: they connect the machine to the generator and weld as usual, with no loss of weld quality. First, the technician assesses the load: a 3 kW generator is for an inverter at 160 A, 5 kW is for a semi-automatic welder and an angle grinder at the same time. Then they run an extension cable from the generator to the welding spot — up to 30 metres so it does not get in the way. They start the generator, let it warm up for a minute and begin welding — the process is no different from working from a socket. The generator must be at least 3 kW — lower power will not handle the inverter at maximum current and the weld will be weak.
Emergency call-out and urgent repair: we arrive on the day you call
PROFI-DOM's mobile welder arrives on the day of the call: for a pipe leak, a crack in a gate or a broken muffler — within 1–2 hours. We will explain which emergencies we fix on site and what to do in case of a leak or crack before arrival.
Arrival within 1-2 hours for emergency calls
For urgent calls, the welder departs within 1-2 hours — the dispatcher accepts the request, and the team immediately sets off with equipment and a generator. To the suburbs (Kargaly, Irgeli, Komsomol) the journey takes up to 2,5 hours; within the city during rush hour, time increases due to traffic jams on Al-Farabi and Tole bi avenues. The cost of an urgent visit is the same as for a scheduled one — the only difference is priority: the master goes immediately, not in queue order. For a quick arrival, it is better to submit the request before 11 in the morning — in the first half of the day the load is minimal, and the welder arrives without delay.
Emergency repair of a leak or crack on site
If a heating pipe leaks, a tank cracks, or a muffler ruptures, we come out on the day of the call, weld on site without dismantling, and stop the leak within an hour. The most common cases: a burst riser in the basement of a private house, a ruptured weld seam on metal gates, a crack in a water tank at a dacha — all are solved on site without removing the part. If the leak is active — shut off the water and relieve the pressure: under pressure the seam will not set, and the master will find the leak location by traces of water and rust.
We work on weekends and public holidays
We go out for welding on Saturday, Sunday and holidays — there is no surcharge for a day off, we work without days off. On weekends the load is lower, so for a planned visit the master will arrive more precisely on time than on weekdays, and you can choose a convenient window without a queue. If an accident occurs on a holiday, the priority of urgent calls is maintained — within the city the welder will arrive within two hours.
Visit zone across Almaty and the suburbs: we reach Kaskelen and Talgar
Let us look at which districts and suburbs we travel to, how quickly we get there and how much a callout costs in different zones.
All 8 districts of Almaty — call-out on the day you call
We work in all 8 districts: Alatau, Almaly, Auezov, Bostandyk, Zhetysu, Medeu, Nauryzbai, Turksib — arrival within 1-2 hours. In Bostandyk (Gorny Gigant, Orbita microdistricts) and Medeu (Kamenka, Samal) districts our craftsmen work most often due to the density of the private sector — these are the main orders for fence and canopy repair. In remote Nauryzbai (Shugyla, Tauzholy) and Auezov (Aksai, Kalkaman) districts travel time is up to 2 hours. In Zhetysu and Turksib (Kulager, Vostok microdistricts) arrival is faster — up to 50 minutes. During rush hour (8-10 am, 17-19 pm) travel time may increase by 20-30 minutes.
Suburbs: Kaskelen, Talgar, Issyk, Uzynagash, Otegen Batyr
- Kaskelen: 30 km from Almaty, travel time 30-40 minutes, call-out from 3000 ₸.
- Talgar: 30 km from Almaty, travel time 30-40 minutes, call-out from 3000 ₸.
- Issyk: 40 km from Almaty, travel time 40-50 minutes, call-out from 4000 ₸.
- Uzynagash: 40 km from Almaty, travel time 40-50 minutes, call-out from 4000 ₸.
- Otegen Batyr: 25 km from Almaty, travel time 20-30 minutes, callout from 3 000 KZT.
How quickly we arrive in the suburbs
We travel to the suburbs on the day of the call: Kaskelen and Talgar within 1.5-2 hours, Issyk and Uzynagash within 2-2.5 hours. Travel time is counted from the city centre: to Kaskelen via the A2 — 30 minutes in free traffic, to Talgar via the Kuldzha highway — 25-30 minutes. To Otegen Batyr (25 km along the Kapshagay highway) we arrive within 1.5-2 hours. If a suburban request comes in before 10:00 —, the welder leaves right after the morning city round, arrives before lunch and finishes the job the same day.
Welder call-out price: cost by zone, hour and shift
Let us break down the cost of a callout in Almaty and the suburbs — how much a visit, an hour of work and a shift cost, what is included in the price and how to pay.
Call-out cost by zone: city and suburbs
| Service | Zone | Unit | Price from, ₸ |
|---|---|---|---|
| On-site visit in Almaty | 8 districts of the city | Site visit | 2000 |
| Call-out up to 30 km | Kaskelen, Talgar, Otegen-batyr | Site visit | 3000 |
| Call-out up to 40 km | Issyk, Uzynagash | Site visit | 4000 |
| Hour of on-site work | Any zone | Hour | 3500 |
| 8-10-hour shift | Any zone | Shift | 25 000 |
| Minimum order | Any zone | Call-out + 1 hour | 5 500 |
The callout is charged once — if the work runs over several days, a repeat visit is not charged, you pay only for the hours worked.
Hourly work or a shift: which is more cost-effective
An hour of on-site work is 3 500 ₸, a 8–10-hour shift is 25 000 ₸: for 8 hours this is 3 000 ₸ cheaper than hourly pay, for 10 — hours 10 000 ₸ cheaper. For small tasks such as welding a hinge onto a gate or sealing a crack in a pipe, an hour is enough and there is no point in overpaying for a shift. Assembling a 6×3 m canopy, welding a greenhouse frame or repairing a gate with reinforced openings takes 4–7 hours of pure time — by 7 hours the hourly rate equals a shift, and if the work may drag on, it is safer to take a shift: the technician is not rushing to the next order. The hourly rate does not depend on the area: whether in the centre or in Kaskelen.
What the call-out cost includes
The cost of the visit and an hour of work includes: the master's arrival, work with own equipment, use of a generator, consumables (electrodes, wire, gas). For argon-arc welding of stainless steel or aluminium, the master brings an argon cylinder and a tungsten electrode — no surcharge for the type of welding is charged, the rate is the same 3500 ₸/hour. If the work requires thick metal from 8 mm, the rate does not change — simply a larger diameter electrode is used, which the master brings along.
Payment on site: Kaspi, cash, transfer
You can pay for the work on site: with a Kaspi card, in cash, by card transfer — after completion, upon fact. To pay via Kaspi you need mobile connection; if there is none — in cash. No prepayment is required — you pay after the master has finished the work and you have accepted the result.
How to call a welder to your home or site: request, photos, arrival time
A step-by-step guide — how to call a specialist to your site in Almaty and the suburbs, what to send to the dispatcher, when the specialist will arrive and what to do in case of a delay.
The on-site welder works with his own equipment: welds gates, pipes and canopies directly on the site, without dismantling and without a power outlet.
What to send the dispatcher: photo, description, address
To submit a request, send our dispatcher a photo of the site, a description of the work and the exact address — the specialist will assess the scope and arrive with the necessary equipment. The photo must be clear: a close-up of the welding area (crack, seam, tear), a general view of the structure (to understand access) and the type of metal (ferrous, stainless, aluminum — by color and shine). In the description, specify exactly what needs to be done: weld, seal, reinforce, extend — and approximate dimensions (seam length, metal thickness). An address with a landmark (e.g., «Zhetysu-3, behind the Keremet store») helps the dispatcher calculate the service zone according to the tariff.
Urgent call-out today or a scheduled visit at a convenient time
Calling a welder to your home is possible today — urgent arrival within 1-2 hours — or at a convenient time (tomorrow, in a week). PROFI-DOM's urgent visit works on the principle of the "nearest available master": the dispatcher checks which welder has just finished an order closer to your address — in the center, the northern industrial zone or the suburbs. A scheduled visit is more precise: a 30-minute window instead of 1-2 hours as with an urgent one — the welder confirms the time a day in advance and calls an hour before arrival to make sure nothing has changed.
What to do if the technician is delayed
If the technician is delayed, the dispatcher will clarify the arrival time by phone: usually the delay is no more than 30 minutes due to traffic jams or a previous order. During rush hour (8-10 in the morning for entering the city, 17-19 in the evening for leaving to the suburbs), the technician may be stuck on Kunaev or Abai Avenue, so the dispatcher will recalculate the route and give a new forecast, and it is better to schedule a planned visit at 10:00-16:00, when the roads are freer. If the delay is more than an hour, the dispatcher will offer to postpone the visit to the next day without extra charge or send another specialist if the shift is not overloaded.
Conclusion
We have gathered the main things you need to know about mobile welding in Almaty — from equipment to price and arrival times.
Key takeaways
- The technician solves the problem on site: there is no need to take the structure to a workshop or dismantle gates, pipes and canopies — the specialist arrives with the equipment and welds on site.
- The generator is a key advantage when working without a socket: if there is no electricity at a country house, construction site or remote district of Almaty, the technician with their own generator will weld as usual, without any loss of weld quality.
- Urgent same-day arrival in case of an emergency: if a pipe is leaking or a gate is cracked, the technician arrives within 1-2 hours and works on weekends and public holidays with no surcharge for urgency.
- The price depends on the zone and the scope of work: a call-out within the city from 2000 ₸, an hour of work 3500 ₸, a shift 25 000 ₸ — the exact cost is quoted by the dispatcher after seeing photos of the site.
- Before calling, send a photo of the defect: the dispatcher will assess the scope, and the specialist will arrive with the right equipment, electrodes and consumables — without unnecessary extra orders on site.


