PROFI-DOM — construction company +7 (747) 618-22-01
ENRUKZ

steel sheet Almaty


Material to GOST / TU quality, cutting ±1 mm
CALCULATE THE COST OF STEEL SHEET

Strength up to 600 MPa, suitable for welding by any method, shipment in 24 hours

  • Savings of up to 15% thanks to direct supplies from Kazakhstan and Russia
  • Warehouse: 3 000 tonnes, 95% items in stock
  • 18 vehicles in our own fleet
  • Every batch comes with GOST and EN certificates

steel sheet Almaty

Material to GOST / TU quality, cutting ±1 mm

Strength up to 600 MPa, suitable for welding by any method, shipment in 24 hours

Savings of up to 15% thanks to direct supplies from Kazakhstan and Russia

Warehouse: 3 000 tonnes, 95% items in stock

18 vehicles in our own fleet

Every batch comes with GOST and EN certificates

steel sheet Almaty

Material to GOST / TU quality, cutting ±1 mm

Strength up to 600 MPa, suitable for welding by any method, shipment in 24 hours

Savings of up to 15% thanks to direct supplies from Kazakhstan and Russia

Warehouse: 3 000 tonnes, 95% items in stock

18 vehicles in our own fleet

Every batch comes with GOST and EN certificates

catalogue of steel sheets

The price is given per sheet, including production and delivery

Hot-rolled sheet 2.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 2.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 2.0×1250×2500, steel St3sp/ps. Supplied in sheets 2.5 m long (2500 mm). Weight per 1 m² — 15.70 kg (calculated). GOST 19903-74.
7 284kzt
Learn more
Hot-rolled sheet 2.5 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 2.5 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 2.5×1250×2500, steel St3sp/ps. Supplied in sheets 2.5 m long (2500 mm). Weight per 1 m² — 19.63 kg (calculated). GOST 19903-74.
9 013kzt
Learn more
Hot-rolled sheet 3.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 3.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 3.0×1250×2500, steel St3sp/ps. Supplied in sheets 2.5 m long (2500 mm). Weight per 1 m² — 23.55 kg (calculated). GOST 19903-74.
10 748kzt
Learn more
Hot-rolled sheet 4.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 4.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 4.0×1500×6000, steel St3sp/ps. Supplied in sheets 6.0 m long (6000 mm). Weight per 1 m² — 31.40 kg (calculated). GOST 19903-74.
26 730kzt
Learn more
Hot-rolled sheet 5.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 5.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 5.0×1500×6000, steel St3sp/ps. Supplied in sheets 6.0 m long (6000 mm). Weight per 1 m² — 39.25 kg (calculated). GOST 19903-74.
33 413kzt
Learn more
Hot-rolled sheet 6.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 6.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 6.0×1500×6000, steel St3sp/ps. Supplied in sheets 6.0 m long (6000 mm). Weight per 1 m² — 47.10 kg (calculated). GOST 19903-74.
40 095kzt
Learn more
Hot-rolled sheet 8.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 8.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 8.0×1500×6000, steel St3sp/ps. Supplied in sheets 6.0 m long (6000 mm). Weight per 1 m² — 62.80 kg (calculated). GOST 19903-74.
53 460kzt
Learn more
Hot-rolled sheet 10.0 mm (St3sp/ps) GOST 19903-74 in AlmatyHot-rolled sheet 10.0 mm (St3sp/ps) GOST 19903-74 in Almaty
Hot-rolled steel sheet 10.0×1500×6000, steel St3sp/ps. Supplied in sheets 6.0 m long (6000 mm). Weight per 1 m² — 78.50 kg (calculated). GOST 19903-74.
66 825kzt
Learn more

OUR COMPANY'S SERVICES

Preparatory operations

Cutting (gas, plasma, laser, waterjet), bending, straightening, making forgings, metal casting, rolling, perforation, blanking and stamping.

Machining

Turning and milling (including CNC), drilling, boring, thread cutting, grinding, polishing, deburring and machining.

Heat and chemical treatment

Heat treatment (hardening, tempering, normalising), carburising, nitriding, boriding, carbonitriding, chemical oxidation (blackening).

Surface coatings and finishing

Electroplated coatings (galvanising, chrome plating, nickel plating, anodising), painting (powder, liquid, anti-corrosion), paint-and-varnish coatings, sandblasting.

Quality control

Ultrasonic testing, magnetic particle testing, radiographic testing, penetrant testing.

Welding and assembly

Welding work (arc, semi-automatic, argon-arc), assembly of steel structures.

Special technologies

Calibration (round, square, hexagon), hydroforming, laser marking.

Logistics and order assembly

Packaging of products, order assembly, warehousing services, delivery of rolled metal and finished products.

Engineering and design

Development of technical documentation, design of steel structures, material selection, and bespoke design and engineering solutions for the client.

LEAVE A REQUESTWe will call you back within 3 minutes

OUR COMPANY'S SERVICES

Cutting (gas, plasma, laser, waterjet), bending, straightening, making forgings, metal casting, rolling, perforation, blanking and stamping.

Preparatory operations

Turning and milling (including CNC), drilling, boring, thread cutting, grinding, polishing, deburring and machining.

Machining

Heat treatment (hardening, tempering, normalising), carburising, nitriding, boriding, carbonitriding, chemical oxidation (blackening).

Heat and chemical treatment

Electroplated coatings (galvanising, chrome plating, nickel plating, anodising), painting (powder, liquid, anti-corrosion), paint-and-varnish coatings, sandblasting.

Surface coatings and finishing

Ultrasonic testing, magnetic particle testing, radiographic testing, penetrant testing.

Quality control

Welding work (arc, semi-automatic, argon-arc), assembly of steel structures.

Welding and assembly

Calibration (round, square, hexagon), hydroforming, laser marking.

Special technologies

Packaging of products, order assembly, warehousing services, delivery of rolled metal and finished products.

Logistics and order assembly

Development of technical documentation, design of steel structures, material selection, and bespoke design and engineering solutions for the client.

Engineering and design

We will call you back within 3 minutes

OUR COMPANY'S SERVICES

Cutting (gas, plasma, laser, waterjet), bending, straightening, making forgings, metal casting, rolling, perforation, blanking and stamping.

Preparatory operations

Turning and milling (including CNC), drilling, boring, thread cutting, grinding, polishing, deburring and machining.

Machining

Heat treatment (hardening, tempering, normalising), carburising, nitriding, boriding, carbonitriding, chemical oxidation (blackening).

Heat and chemical treatment

Electroplated coatings (galvanising, chrome plating, nickel plating, anodising), painting (powder, liquid, anti-corrosion), paint-and-varnish coatings, sandblasting.

Surface coatings and finishing

Ultrasonic testing, magnetic particle testing, radiographic testing, penetrant testing.

Quality control

Welding work (arc, semi-automatic, argon-arc), assembly of steel structures.

Welding and assembly

Calibration (round, square, hexagon), hydroforming, laser marking.

Special technologies

Packaging of products, order assembly, warehousing services, delivery of rolled metal and finished products.

Logistics and order assembly

Development of technical documentation, design of steel structures, material selection, and bespoke design and engineering solutions for the client.

Engineering and design

We will call you back within 3 minutes

Prices for steel sheets

CATEGORYTHICKNESSSTEEL GRADESIZEUNIT OF MEASUREAVERAGE PRICE
Hot-Rolled Steel Sheet (HR)
Hot-rolled sheet2.0St3sp/ps1.25x2.5т370000
Hot-rolled sheet2.5St3sp/ps1.25x2.5т365000
Hot-rolled sheet3.0St3sp/ps1.25x2.5т364000
Hot-rolled sheet4.0St3sp/ps1.5x6.0т355000
Hot-rolled sheet5.0St3sp/ps1.5x6.0т355000
Hot-rolled sheet6.0St3sp/ps1.5x6.0т355000
Hot-rolled sheet8.0St3sp/ps1.5x6.0т341000
Hot-rolled sheet10.0St3sp/ps1.5x6.0т341000
Hot-rolled sheet12.0St3sp/ps1.5x6.0т341000
Hot-rolled sheet16.0St3sp/ps1.5x6.0т340000
Hot-rolled sheet20.0St3sp/ps1.5x6.0т410000
Cold-Rolled Steel Sheet (CR)
Cold-rolled sheet0.508kp/ps1.0x2.0т385000
Cold-rolled sheet0.708kp/ps1.25x2.5т385000
Cold-rolled sheet0.808kp/ps1.25x2.5т380000
Cold-rolled sheet1.008kp/ps1.25x2.5т375000
Cold-rolled sheet1.208kp/ps1.25x2.5т375000
Cold-rolled sheet1.508kp/ps1.25x2.5т370000
Cold-rolled sheet2.008kp/ps1.25x2.5т370000
Galvanized steel sheet
Galvanized sheet0.408ps1.0x2.0т435000
Galvanized sheet0.508ps1.25x2.5т430000
Galvanized sheet0.708ps1.25x2.5т425000
Galvanized sheet1.008ps1.25x2.5т420000
Low-alloy steel sheet (09G2S)
Hot-rolled sheet6.009Г2С1.5x6.0т350000
Hot-rolled sheet10.009Г2С1.5x6.0т350000
Hot-rolled sheet20.009Г2С1.5x6.0т410000
LEAVE A REQUESTWe will call you back within 3 minutes

Why we are №1 in Kazakhstan

Our advantages

LEAVE A REQUESTWe will call you back within 3 minutes
  1. 01.
    OUR OWN WAREHOUSE OF 3 000 TONNES

    Pipes, beams, sheets and rebar to GOST are in stock. More than 2 500 items available. We guarantee a selection for any project.

  2. 02.
    OUR COMPANY HAS BEEN OPERATING FOR 30 YEARS

    We have been operating since 1994. Over this time we have found the best metal suppliers, and bulk purchasing allows us to cut costs for our clients.

  3. 03.
    cutting accuracy to ±1 mm

    On Hypertherm CNC machines. We eliminate defects and metal waste. We save clients up to 15% of the budget on every project.

  4. 04.
    Delivery strictly on time

    We deliver 98,5% of orders exactly on time thanks to our own fleet of 18 vehicles. You will avoid production downtime and penalties from clients.

  5. 05.
    A WIDE CHOICE OF METAL

    We have 100+ items in stock: steel, aluminium and stainless steel from MMK, RUSAL and Severstal. Get the metal you need turnkey.

  6. 06.
    Direct supplies from 7 mills

    We work directly, without intermediaries, with the MMK, NLMK and ChTPZ mills. Prices are 10-15% below market and every product comes with a quality certificate.

  7. 07.
    Dispatch from the warehouse in 3 hours

    We will dispatch 95% items from our warehouse within 3 hours of your request. You will cut waiting time and speed up the start of the project.

  8. 08.
    Deferred payment of up to 30 days

    We provide official deferred payment of up to 10 000 000 KZT for regular clients. Keep your working capital.

  9. 09.
    We will calculate the cost in 15 min

    Send us a drawing or specification. Our engineer will prepare a quote with the exact cost in 15 minutes and send it to your email.

  10. 10.
    Packaging protects against corrosion

    An anti-corrosion film and wooden spacers for sheet metal. Rebar in bundles of 2 tonnes. Storage life of up to 12 months.

Answer 6 questions and get an estimate accurate to 95%

Find out the cost of steel sheet in 1 minute

What type of steel sheet is required?

Specify the steel sheet thickness

What sheet format do you need?

Specify the sheet dimensions (length × width), mm

Specify the required quantity

What is the required delivery timeframe?

One last step!

You can view the results as soon as you enter and send your number!

+7

Customer reviews of steel sheets in Almaty

Your feedback matters a great deal to us

5.0
based on 22 reviews
5★
21
4★
1
3★
0
2★
0
1★
0
Sort by:
NS
Nurlan Sarsenov
18 May 2026
We were building a corrugated-sheet fence on concrete posts and needed rebar for the frameworks. We spent a long time looking for where to buy it at a fair price and without buying «a pig in a poke». Everything here seemed fine. The manager helped work out how much of everything was needed and did not push anything unnecessary. They delivered on the agreed day, everything straight, no rust. All in all, we worked calmly and without any hassle.
RZ
Rakhat Zholdasov
15 May 2026
I was ordering rebar for my house foundation. It turned out excellent! Thanks to Askar, he explained everything nicely.
BT
Baurzhan Tastanov
12 May 2026
I needed rebar for a bathhouse foundation. The prices here seemed reasonable compared with others. I placed the order and picked it up myself the next day. Everything was spot on, all by weight, they even cut a couple of lengths in half for free. Nice.

Steel sheets

Author: Aleksandr Volkov, lead process engineer for steel structures

STEEL SHEETS: CHOOSING WITHOUT MISTAKES

On a construction site or in a workshop, you don't need abstract iron. You need a result. A structure that will bear the load, pass quality control and fit the budget. Modern steel rolled product is the basic building block for such a result. Its main advantage is predictability. But that predictability must first be earned by getting to grips with the details. Mistakes in material selection turn into deformations, welding problems and rework.

In the past, people often worked on a leftover basis. They took whatever was in stock — thick rolled product instead of the optimal one, or reinforced weak material with frames. The main choice was St3 steel, whose properties could drift from batch to batch. Precise cutting was rare, so metal was ordered with a large margin, and the waste went to scrap.

Alternatives were sought in composites and aluminium. For load-bearing structures they did not fit: expensive, flammable or not rigid enough. Steel remained the main material, but the approach to choosing it has changed. Now we control the process. Modern steel sheet is a precise tool. Its characteristics — steel grade, rolling type, geometry — are known in advance. This lets us calculate rather than over-engineer.

Hot-rolled or cold-rolled: what is the difference

The main choice starts here. The technology determines everything: from price to area of application. These are not just two types, they are two different paths.

Hot-rolled product. The blank is heated red-hot and passed through the rolls. The method is fast and economical. But there is a downside. After rolling, a layer of scale remains on the surface, and slight waviness is possible. The accuracy of thickness and geometry is medium. You sacrifice appearance and perfect geometry, but you get a strong, cost-effective material for structural frames, beams and rough structures. Its strength characteristics are often higher due to the metal's structure after hot deformation.

Cold-rolled. Here the already-cooled blank is processed. The goal is a perfect surface and surgical precision of dimensions. The price of such quality is a higher production cost and lower ductility during complex bending. It is not for everything. Use it where appearance matters (facades, housings) or where high precision is required for stamping.
Imagine the difference between a forged item and a piece of jewellery. Both are metal, but the approach and the result are different.

Expert advice from Aleksandr Volkov, lead process engineer: Do not replace hot-rolled steel sheet with cold-rolled in welded load-bearing structures. The structure of cold-rolled steel can behave unpredictably under load after welding. This is a common mistake that leads to cracks.

Parameter

Hot-rolled product

Cold-rolled product

Technology

Rolling at high temperature

Rolling at room temperature

Surface

With scale, waviness possible

Smooth, clean

Accuracy

Standard (tolerances per GOST)

Increased (calibrated)

Key property

High ductility throughout the material

High surface hardness and strength

Main application

Frames, supports, beams where appearance does not matter

External panels, precise parts, stamping

Trade-off

Savings at the expense of appearance

Perfect appearance and precision at a high price

Steel grade: the numbers that work

The marking St3 or 09G2S on the certificate is an instruction for the metallurgist. Strength, weldability, frost resistance and the final steel sheet price per item depend on it.

St3 — is ordinary-quality steel. A workhorse for unloaded structures: fences, formwork, auxiliary elements. For critical facilities it is no longer sufficient.

In bridge building, high-rises and in the North, low-alloy steels are needed. For example, 09G2S. Let's decode it: 0.09% carbon (little, welds well), 2% manganese (Mn), silicon (Si). Manganese and silicon are alloying elements. They increase strength and, critically, resistance to brittle fracture in frost. Choosing this grade for working at -40 °C means a higher steel sheet price per item and strict weld control.

It's like choosing fuel. St3 — is standard 92- petrol. 09G2S is special winter diesel with anti-gel. The second is more expensive, but without it the engine will stall.

Areas of application of different steel grades

Steel grade

Characteristic

Where it is used

Important nuance

Ст3пс/сп

Carbon, general-purpose.

Non-critical structures, foundations.

The letters 'ps' or 'sp' indicate the degree of deoxidation. 'sp' (killed) is preferable for welding.

09Г2С

Low-alloy, for low temperatures.

Structures in northern regions, critical facilities.

Be sure to require a certificate stating the impact toughness at -40 °C.

10KHSND

Weathering (corten). Self-forming protective patina.

Architectural facades, unpainted elements.

The patina forms unevenly during the first year or two. The price of corten rolled metal is high.

304 (AISI)

Austenitic stainless.

Food industry, chemical industry, aggressive environments.

Does not tolerate constant contact with chlorides (for example, near the sea).

Thickness and size: how to avoid unnecessary waste

The size range is a tool for saving money. Standard blank sizes are 1500×6000 mm or 1250×2500 mm. If your part is 1400×2900 mm, cutting it from a standard sheet will lose you almost a third of the metal as offcuts.

Nowadays suppliers offer a cutting-to-size service. The corresponding steel sheet price for this is usually lower than the cost of the waste generated when cutting it yourself. It also saves your workshop time and resources.

Thickness tolerances are a separate topic. For hot-rolled product 10 mm thick, the permissible deviation can be ±0.5 mm. For cold-rolled calibrated product it is only ±0.05 mm. This matters for press moulds and dies.

Expert advice from Aleksandr Volkov, lead process engineer: When welding material of different thicknesses (for example, 6 mm and 12 mm), make a smooth transition. Chamfer the thicker element to reduce the stiffness difference. The bevel length should be at least four times the thickness difference (in this case 4*(12-6)=24 mm). This will reduce the risk of stress concentration. This rule is often overlooked.

Logistics and acceptance: where the hidden losses lie

The query buy steel sheet includes not only the price per tonne — that is only part of the total. Several steps lead to the final cost.

Delivery. Loading by crane-manipulator is standard. Check whether it is included. Transporting long rolled products (more than 6 m) requires special transport. Sometimes cutting into shorter blanks at the supplier's warehouse costs less than renting a long-load vehicle.

Documents. A GOST certificate of conformity is mandatory. It clearly states: grade, chemical composition, mechanical properties. For critical facilities, a manufacturer's certificate is needed, not a trading company's.

Acceptance. Check the facts. Geometry with a tape measure, thickness with an ultrasonic gauge. Even within a single sheet, the thickness can gradually change from edge to centre — this is a result of the natural wear of the mill's rolls. On the edge after plasma cutting, a blue-yellow temper colour is sometimes visible. This is an overheated zone where the metal may have become more brittle. Such an edge must be cleaned before welding.


Stage

Risks

What to do

Preparing the technical brief

Inaccurate calculation, not accounting for waste.

Make a cutting plan. Consult the supplier's process engineers.

Choosing a seller

A reseller without certificates.

Look for a partner with warehouse stock and their own fleet of processing equipment.

Contract

Hidden charges for loading and storage.

Spell out all conditions in the contract: loading by and at the expense of the supplier, 3 days of free storage.

Acceptance

Mismatch of dimensions or grade.

Accept the material with a measuring tool. Check the marking on the rolled metal against the data in the certificate.

What is changing in the market
Ordinary galvanizing is gradually giving way to materials with an aluminium-zinc coating (for example, Galvalume). Its service life is 2-4 times longer in aggressive atmospheric conditions. Bimetallic solutions are appearing — for example, a structural steel base with a stainless-steel cladding layer. This is for vessels where corrosion resistance is needed on one side and strength on the other.

Cutting technologies are not standing still either. Laser cutting with an inert gas gives a clean edge, ready for welding without additional processing.

Expert advice from Aleksandr Volkov, lead process engineer: Do not use new expensive materials everywhere just for reliability. Often the decision to buy hot-rolled steel sheet with a quality primer turns out to be optimal in terms of total cost of ownership. Apply innovations selectively, where their effect can be precisely calculated — in reducing weight, extending service life or cutting labour costs.

Steel sheet is a semi-finished product. Its value is revealed only in the finished structure. Saving on understanding its characteristics — grade, rolling method, edge condition — almost always leads to extra costs at the installation or operation stage.

The most profitable contract is with someone who speaks your technical language. Who will help you choose an equivalent, warn you about technological limitations and give you honest documentation for the material. In this case you are buying not just rolled metal, but confidence in the result. And that is the main goal. To buy steel sheets correctly, you need to treat it as part of a project, not as a simple purchase.

Frequently asked questions
about steel sheets

What is steel sheet?
Steel sheet is a flat-rolled product made of carbon or alloy steel, produced by hot or cold rolling.
What types of steel sheets are there?
Main types: hot-rolled, cold-rolled, galvanized, checkered, structural and stainless sheet.
What is the difference between hot-rolled and cold-rolled sheet?
Hot-rolled is cheaper and stronger, cold-rolled is more precise in size and has a smoother surface.
Where is steel sheet used?
Used in construction, mechanical engineering, and the production of steel structures, fencing, housings and parts.
What are the standard sizes of steel sheet?
Common formats: 1000×2000 mm, 1250×2500 mm, 1500×3000 mm, 1500×6000 mm.
What thickness of steel sheet is available?
The thickness ranges from 0,5 mm to 160 mm depending on the type of rolled product and GOST.
Which GOST is used for steel sheet?
The most commonly used are GOST 19903, GOST 14637, GOST 16523 and GOST 14918 (for galvanizing).
What steel grade is used for sheets?
Popular grades: St3, 09G2S, St20, St45, as well as stainless AISI 304, 321.
What is the price of a 6 mm sheet?
The price of a sheet 6 mm thick depends on the steel grade, format and purchase volume. It is usually calculated per tonne or per sheet.
What is the price of a metal sheet?
The cost of a metal sheet is formed based on the sheet type (HR/CR), thickness, steel grade and market conditions.
What does the cost of steel sheet depend on?
The price depends on the thickness, steel grade, rolling method, presence of a coating and order volume.
How to calculate the weight of a steel sheet?
The weight is calculated using the formula: length × width × thickness × steel density (≈7850 kg/m³).
Can steel sheet be cut to size?
Yes, cutting by gas, plasma, laser or guillotine to the specified sizes is possible.
How to store steel sheets?
Sheets are stored in dry rooms, on supports, protected from moisture and corrosion.
How to choose steel sheet for construction?
For construction work, a hot-rolled sheet of St3 or 09G2S steel with the required thickness and GOST is more often chosen.

We also make

COLD-ROLLED SHEET
SHEET FOR LASER CUTTING

Heat-resistant sheet

Acid-resistant sheet

Perforated sheet

Structural sheet

Tool sheet
PRODUCT CONSULTATIONWe will call you back within 3 minutes

We also make

Steel sheetROOFING SHEETGALVANISED SHEET

Checkered Sheet

Stainless steel sheet

ALUMINIUM SHEETCOPPER SHEETBrass sheetCOLD-ROLLED SHEETSHEET FOR LASER CUTTING

Heat-resistant sheet

Acid-resistant sheet

Structural sheet

Polymer sheet

Perforated sheet

Tool sheet
PRODUCT CONSULTATION

We will call you back within 3 minutes

We also make

Steel sheetROOFING SHEETGALVANISED SHEET

Checkered Sheet

Stainless steel sheet

ALUMINIUM SHEETCOPPER SHEETBrass sheetCOLD-ROLLED SHEETSHEET FOR LASER CUTTING

Heat-resistant sheet

Acid-resistant sheet

Structural sheet

Polymer sheet

Perforated sheet

Tool sheet

We will call you back within 3 minutes

Phone:+7 (747) 618-22-01Our address:Almaty, Angarskaya, 97Daily: 9:00–21:00 (by appointment)