
Corrugated sheet Almaty
withstands a load of 180 kg/m², cut to size ±1 mm
Weight from 4 to 8 kg/m², rigidity up to 10 times higher, always in stock, dispatch within 24 hours.
Savings of up to 15% thanks to direct supplies from Kazakhstan and Russia
Warehouse: 3 000 tonnes, 95% items in stock
18 vehicles in our own fleet
Every batch comes with GOST and EN certificates

Corrugated sheet Almaty
withstands a load of 180 kg/m², cut to size ±1 mm
Weight from 4 to 8 kg/m², rigidity up to 10 times higher, always in stock, dispatch within 24 hours.

Savings of up to 15% thanks to direct supplies from Kazakhstan and Russia

Warehouse: 3 000 tonnes, 95% items in stock

18 vehicles in our own fleet

Every batch comes with GOST and EN certificates

Corrugated sheet Almaty
withstands a load of 180 kg/m², cut to size ±1 mm
Weight from 4 to 8 kg/m², rigidity up to 10 times higher, always in stock, dispatch within 24 hours.

Savings of up to 15% thanks to direct supplies from Kazakhstan and Russia

Warehouse: 3 000 tonnes, 95% items in stock

18 vehicles in our own fleet

Every batch comes with GOST and EN certificates
corrugated sheet catalogue
The price is given per square metre, including production and delivery
Corrugated sheet С8 galvanised 0.3 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet С8 galvanised 0.5 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet С10 galvanised 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet МП20 galvanised 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet МП20 galvanised 0.5 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet НС35 galvanised 0.5 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet НС35 galvanised 0.7 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet Н60 galvanised 0.7 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet Н75 galvanised 0.7 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet Н75 galvanised 0.8 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet С8 coloured RAL 0.4 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet С8 coloured RAL 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet МП20 coloured RAL 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet МП20 coloured RAL 0.5 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet С21 coloured RAL 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet НС35 coloured RAL 0.5 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet "Wood effect" 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet "Stone effect" 0.45 mm (Ст3) GOST 24045 in Almaty
Corrugated sheet "Brick" 0.45 mm (Ст3) GOST 24045 in AlmatyOUR COMPANY'S SERVICES

Preparatory operations
Cutting (gas, plasma, laser, waterjet), bending, straightening, making forgings, metal casting, rolling, perforation, blanking and stamping.

Machining
Turning and milling (including CNC), drilling, boring, thread cutting, grinding, polishing, deburring and machining.


Heat and chemical treatment
Heat treatment (hardening, tempering, normalising), carburising, nitriding, boriding, carbonitriding, chemical oxidation (blackening).

Surface coatings and finishing
Electroplated coatings (galvanising, chrome plating, nickel plating, anodising), painting (powder, liquid, anti-corrosion), paint-and-varnish coatings, sandblasting.

Quality control
Ultrasonic testing, magnetic particle testing, radiographic testing, penetrant testing.

Welding and assembly
Welding work (arc, semi-automatic, argon-arc), assembly of steel structures.

Special technologies
Calibration (round, square, hexagon), hydroforming, laser marking.

Logistics and order assembly
Packaging of products, order assembly, warehousing services, delivery of rolled metal and finished products.

Engineering and design
Development of technical documentation, design of steel structures, material selection, and bespoke design and engineering solutions for the client.
OUR COMPANY'S SERVICES

Cutting (gas, plasma, laser, waterjet), bending, straightening, making forgings, metal casting, rolling, perforation, blanking and stamping.
Preparatory operations

Turning and milling (including CNC), drilling, boring, thread cutting, grinding, polishing, deburring and machining.
Machining


Heat treatment (hardening, tempering, normalising), carburising, nitriding, boriding, carbonitriding, chemical oxidation (blackening).
Heat and chemical treatment

Electroplated coatings (galvanising, chrome plating, nickel plating, anodising), painting (powder, liquid, anti-corrosion), paint-and-varnish coatings, sandblasting.
Surface coatings and finishing

Ultrasonic testing, magnetic particle testing, radiographic testing, penetrant testing.
Quality control

Welding work (arc, semi-automatic, argon-arc), assembly of steel structures.
Welding and assembly

Calibration (round, square, hexagon), hydroforming, laser marking.
Special technologies

Packaging of products, order assembly, warehousing services, delivery of rolled metal and finished products.
Logistics and order assembly

Development of technical documentation, design of steel structures, material selection, and bespoke design and engineering solutions for the client.
Engineering and design
We will call you back within 3 minutes
OUR COMPANY'S SERVICES

Cutting (gas, plasma, laser, waterjet), bending, straightening, making forgings, metal casting, rolling, perforation, blanking and stamping.
Preparatory operations

Turning and milling (including CNC), drilling, boring, thread cutting, grinding, polishing, deburring and machining.
Machining


Heat treatment (hardening, tempering, normalising), carburising, nitriding, boriding, carbonitriding, chemical oxidation (blackening).
Heat and chemical treatment

Electroplated coatings (galvanising, chrome plating, nickel plating, anodising), painting (powder, liquid, anti-corrosion), paint-and-varnish coatings, sandblasting.
Surface coatings and finishing

Ultrasonic testing, magnetic particle testing, radiographic testing, penetrant testing.
Quality control

Welding work (arc, semi-automatic, argon-arc), assembly of steel structures.
Welding and assembly

Calibration (round, square, hexagon), hydroforming, laser marking.
Special technologies

Packaging of products, order assembly, warehousing services, delivery of rolled metal and finished products.
Logistics and order assembly

Development of technical documentation, design of steel structures, material selection, and bespoke design and engineering solutions for the client.
Engineering and design
We will call you back within 3 minutes
Profiled sheet prices
| CATEGORY | THICKNESS | STEEL GRADE | SIZE | UNIT OF MEASURE | AVERAGE PRICE |
|---|---|---|---|---|---|
| Galvanised corrugated sheet (standard) | |||||
| Corrugated sheet С8 | 0,3 | St3 | 1200 | м² | 1950 |
| Corrugated sheet С8 | 0,4 | St3 | 1200 | м² | 2450 |
| Corrugated sheet С8 | 0,5 | St3 | 1200 | м² | 2980 |
| Corrugated sheet С10 | 0,45 | St3 | 1150 | м² | 2720 |
| Corrugated sheet МП20 | 0,45 | St3 | 1150 | м² | 2850 |
| Corrugated sheet МП20 | 0,5 | St3 | 1150 | м² | 3250 |
| Corrugated sheet НС35 | 0,5 | St3 | 1060 | м² | 3400 |
| Corrugated sheet НС35 | 0,7 | St3 | 1060 | м² | 4450 |
| Corrugated sheet Н60 | 0,7 | St3 | 902 | м² | 4950 |
| Corrugated sheet Н75 | 0,7 | St3 | 800 | м² | 5600 |
| Corrugated sheet Н75 | 0,8 | St3 | 800 | м² | 6400 |
| Painted corrugated sheet (polymer coating RAL) | |||||
| Corrugated sheet С8 RAL | 0,4 | St3 | 1200 | м² | 2900 |
| Corrugated sheet С8 RAL | 0,45 | St3 | 1200 | м² | 3350 |
| Corrugated sheet МП20 RAL | 0,45 | St3 | 1150 | м² | 3550 |
| Corrugated sheet МП20 RAL | 0,5 | St3 | 1150 | м² | 3950 |
| Corrugated sheet С21 RAL | 0,45 | St3 | 1050 | м² | 3750 |
| Corrugated sheet НС35 RAL | 0,5 | St3 | 1060 | м² | 4400 |
| Decorative corrugated sheet (Printech) | |||||
| Corrugated sheet "Wood effect" | 0,45 | St3 | 1200 | м² | 4750 |
| Corrugated sheet "Stone effect" | 0,45 | St3 | 1200 | м² | 4750 |
| Corrugated sheet "Brick" | 0,45 | St3 | 1200 | м² | 4750 |
| Accessory elements (RAL) | |||||
| Roof ridge | - | 0,45 | 2000 | pcs | 2950 |
| Eaves strip | - | 0,45 | 2000 | pcs | 2300 |
| Barge board | - | 0,45 | 2000 | pcs | 2550 |
| Valley | - | 0,45 | 2000 | pcs | 3800 |
- 01.OUR OWN WAREHOUSE OF 3 000 TONNES
Pipes, beams, sheets and rebar to GOST are in stock. More than 2 500 items available. We guarantee a selection for any project.
- 02.OUR COMPANY HAS BEEN OPERATING FOR 30 YEARS
We have been operating since 1994. Over this time we have found the best metal suppliers, and bulk purchasing allows us to cut costs for our clients.
- 03.cutting accuracy to ±1 mm
On Hypertherm CNC machines. We eliminate defects and metal waste. We save clients up to 15% of the budget on every project.
- 04.Delivery strictly on time
We deliver 98,5% of orders exactly on time thanks to our own fleet of 18 vehicles. You will avoid production downtime and penalties from clients.
- 05.A WIDE CHOICE OF METAL
We have 100+ items in stock: steel, aluminium and stainless steel from MMK, RUSAL and Severstal. Get the metal you need turnkey.
- 06.Direct supplies from 7 mills
We work directly, without intermediaries, with the MMK, NLMK and ChTPZ mills. Prices are 10-15% below market and every product comes with a quality certificate.
- 07.Dispatch from the warehouse in 3 hours
We will dispatch 95% items from our warehouse within 3 hours of your request. You will cut waiting time and speed up the start of the project.
- 08.Deferred payment of up to 30 days
We provide official deferred payment of up to 10 000 000 KZT for regular clients. Keep your working capital.
- 09.We will calculate the cost in 15 min
Send us a drawing or specification. Our engineer will prepare a quote with the exact cost in 15 minutes and send it to your email.
- 10.Packaging protects against corrosion
An anti-corrosion film and wooden spacers for sheet metal. Rebar in bundles of 2 tonnes. Storage life of up to 12 months.
Find out the cost of corrugated sheet in 1 minute
CUSTOMER REVIEWS on corrugated sheets in Almaty
Your feedback matters a great deal to us
Corrugated sheet in Almaty
HOW TO CHOOSE THE MATERIAL AND NOT OVERPAY FOR «FOIL»? AN HONEST GUIDE FROM AN ENGINEER
If you are looking for something to roof a house with, clad a hangar or put up a fence in Almaty, you have surely already run into a wild spread of prices and specifications. On one side - temptingly cheap options, on the other - price tags that make your eye twitch.
I have been working with metal for more than 10 years and have seen hundreds of sites. And I have seen how a cheap fence turns into a rusty sieve in a single winter, and how roofs 'flap' in the wind so much that you cannot sleep. Today we will not be reading lectures from textbooks. I will tell you what sales managers usually keep quiet about, so that you can buy profiled sheet that will genuinely last a long time.
What is profiled sheet and why do you even need it?
Essentially, this is a construction kit for adults. The main plus is balance. It is not the most “elite” material, but it handles 90% tasks in private and commercial construction for reasonable money. If you need it fast, reliable and without unnecessary showing off - this is your choice.
But there is a nuance here. The Almaty market is flooded with metal of varying quality. Often frankly thin rolled stock is sold under the guise of “premium”.
Expert tip from Daniyar Isayev: "Never take the metal thickness on trust or from the label. If you are buying profiled sheets for a critical area (house roofing, load-bearing structures), demand a micrometer measurement right in front of you. The difference between 0.35 mm and 0.45 mm is almost invisible to the eye, but in service it is the difference between 'will last 20 years' and 'will buckle under the first snow'."
Evolution of the material: from slate to polymers
How it worked before
Slate used to be king. Cheap, seemingly strong. But it had a pile of problems: it is heavy (the rafter system has to be robust), brittle (hail or a stone and you have a hole), and over time it grew moss and turned black. On top of that, asbestos is not about health.
Dead-end branch
There were attempts to introduce ondulin (bitumen sheets) as a mass replacement. Yes, it is light and quiet. But in our sharply continental climate, when it is +40°C in summer and -30°C in winter, it often deformed, “drifted” in the heat or faded in patches within a couple of seasons.
A modern solution
Metal profiled sheet with a polymer coating solved these problems.
- Weight: 10 times lighter than slate (the load on the foundation and walls is reduced).
- Aesthetics: Polymers do not just colour, they protect.
- Installation: Sheets are cut to the size of the roof slope, whether 6 or 12 metres - minimum joints.
When choosing metal, we make a compromise: profiled sheet is “louder” than slate during rain. If the roof build-up is not properly soundproofed, you will hear every drop. But that is the price of durability and lightness.
The anatomy of choice: thickness and zinc — the two pillars of reliability
Steel thickness: where is the truth?
In Almaty, sheets are sold with a thickness from 0.25 mm to 0.9 mm.
- 0.25–0.35 mm: I call this “foil”. It is only good for temporary fencing at a construction site that will later be thrown away. You cannot use this for your own fence — the wind will crumple it.
- 0.4–0.45 mm: The golden mean for facades and fences.
- 0.45–0.5 mm: The mandatory minimum for the roof of a residential house.
Galvanising: invisible protection
Zinc is applied on top of the steel. It is what protects against corrosion when you scratch the paint.
- Economy (80-100 g/m²): Lasts 5-7 years.
- Standard (140-180 g/m²): will last 15-20 years.
- Premium (275 g/m²): A material for the ages, but the price bites.
What galvanising classes are there:
Coating class | Zinc content (g/m²) | Approximate service life | What it is suitable for |
Economy | 80–100 | 5–10 years | Temporary fences, sheds, site cabins |
Standard | 140–180 | 15–25 years | Fences for private houses, canopies, roofing for country houses |
Premium | 225–275 | 30–50 years | Permanent roofing for cottages and industrial facilities |
Profile types: C, H, NS — what do these letters mean?
S (Wall)
For example, C-8, C-10.
It has a small corrugation. It looks neat, but the rigidity is low.
- Where it goes: fences, wall cladding, ceiling linings.
- Where it must not go: on the roof. The snow load in Almaty would simply crush it.
H (Load-bearing)
For example, H-60, H-75.
High corrugation, additional stiffening ribs. It withstands enormous loads.
- Where it goes: floor structures, flat roofs of large hangars, permanent formwork.
NS (Load-bearing and wall)
For example, NS-35, MP-20.
A universal soldier.
- Where it goes: on the roof, on the fence (if a very strong one is needed) and on workshop walls.
Expert tip from Daniyar Isayev: "A common mistake in Almaty is using C-8 on the roofs of canopies with a low pitch angle. People think: 'It's metal, what could happen to it?'. But in winter wet snow accumulates, does not slide off, and the sheet bends inward, breaking the seal at the joints. For roofing, take at least MP-20 or NS-35. The stingy man pays twice, or even three times."
Finishes: gloss, matt or print?
There is a compromise here too. By choosing a profiled sheet with an expensive coating, you pay for colour fastness and protection against scratches.
- Polyester (Gloss): The most popular. Inexpensive, shiny, with a huge choice of colours. The downside is that it scratches easily during installation and transport.
- Matte polyester (Viking, Velour): Looks richer, does not glare in the sun and feels like velvet to the touch. It is thicker than ordinary polyester and resists fading better.
- Printech (Wood/stone effect): A very popular profiled sheet in Almaty for fences. From a distance it is indistinguishable from real wood or stonework, but it does not rot and needs no maintenance.
Specification of popular coatings
Characteristic | Polyester (PE) | Matte PE | Printech (Print) |
Coating thickness (µm) | 25 | 30–35 | 30–35 |
UV resistance | Medium | High | High |
Scratch resistance | Low | Medium | Medium |
Texture | Smooth, glossy | Rough | Smooth/Textured |
Profiled sheet price: what makes up the cost?
The price depends on three pillars:
- Metal thickness. 0.45 mm is always more expensive than 0.35 mm by about 30 per cent.
- Steel manufacturer. Metal from ArcelorMittal (Karaganda) or Russian giants (Severstal, MMK) costs more than Chinese NoName because it has an honest zinc layer and the stated thickness matches reality.
- Coating. A plain galvanised sheet is the cheapest. Coloured is more expensive. Matte or “wood-effect” is even more expensive.
To buy profiled sheet at a good price, do not look at the lowest price in the advert. Ask the seller: 'What is the real thickness and whose metal is it?'. Often a 'super price' means Chinese 0.3 mm metal with a minimal zinc layer, which will start rusting at the edges within a year.
Imagine you are buying a winter jacket. You could buy a thin windbreaker for pennies, but you will freeze in winter. You could buy a down jacket. The metal profile is your house's clothing.
Hidden installation nuances that builders keep quiet about
Cross-domain analogy
Imagine you bought an expensive sports car but fill it with 80--octane fuel and change the oil once every 50 thousand km. The car will break down, and the factory is not to blame. Roofing is the same. The profiled sheet is the body, while the screws, batten and vapour barrier are the “consumables” on which the life of the “car” depends.
- Cutting with an angle grinder is the death of the metal. Sparks from the abrasive wheel burn the polymer coating and the zinc. Corrosion (rust spots) will begin at the cut within a couple of months. You can only cut with metal shears or a special drill attachment.
- Saving on screws. Cheap Chinese screws have a poor rubber gasket (EPDM). After 2 years it dries out in the sun, cracks, and water runs straight through the hole in the roof. Buy quality fasteners; they cost pennies on the scale of a build, but they save your nerves.
- Incorrect batten spacing. If the batten is made too sparse to save on timber, the sheet will sag under the snow.
Expert tip from Daniyar Isayev: "If a crew shows up at your site with a single angle grinder and says, 'Boss, we've done it this way a hundred times', send them packing. Profiled sheets require delicate handling when cutting. Demand the use of nibblers or a metal jigsaw."
- Smog and dust. The air contains many suspended particles. Settling on the roof, together with moisture they can form a mildly aggressive environment. That is why the zinc layer is critically important here.
- Wind. In the foothill areas, wind gusts can be hurricane-force. Profiled sheets are wind-prone. If you skimp on the metal thickness or the number of screws, the fence will fly off to the neighbours. This is no joke, it is the statistics of every storm warning.
- UV radiation. The mountain sun beats down mercilessly. Cheap Chinese pigment fades in a single summer. The south side of the fence will turn whitish, while the north side stays burgundy. Choose trusted factories that add UV stabilisers to the paint.
Popular questions about corrugated sheet
What is profiled sheet?
What shapes of corrugated sheet are there?
- trapezoidal,
- wavy (less common),
- reinforced with additional stiffening ribs.
What else is corrugated sheet called?
What does corrugated sheet consist of?
- steel base,
- zinc coating,
- primers,
- polymer coating (if painted).
In what year did corrugated sheet first appear?
What types of corrugated sheet are there?
- S — wall,
- H — load-bearing,
- NS — universal (wall + roof).
Where is corrugated sheet used?
- fences,
- roofing,
- facades,
- floors,
- hangars and warehouses.
What thicknesses of corrugated sheet are available?
For fences — 0,4–0,5 mm, for roofing — from 0,5 mm.
What sizes of corrugated sheet are there?
Length — from 0,5 to 12 m (often made to order).
What does the profiled sheet marking mean (C8, C21, H60)?
Is corrugated sheet suitable for roofing?
Is corrugated sheet suitable for a fence?
How does profiled sheet differ from metal roof tiles?
Does corrugated sheet rust?
Which GOST standards is corrugated sheet manufactured to?
- GOST 24045-2016
- GOST 14918 (galvanised steel)















