PROFI-DOM — construction company +7 (707) 068-88-68
ENRUKZ

Gas welder in Almaty


from 1 500 KZT* per metre of joint
CALCULATE THE COST OF WELDING WORK

Has a cast-iron radiator cracked, a muffler burned through, or a copper tube leaked? We will weld metal from 0,5 mm with gas without burning through — even without a socket.

  • Without electricity — with
    own cylinders
  • Urgent — master
    in 2 hours
  • 3-year warranty
    on every seam
  • Part repair
    from 1 200 ₸ per point

Gas welder in Almaty

from 1 500 KZT* per metre of joint

Has a cast-iron radiator cracked, a muffler burned through, or a copper tube leaked? We will weld metal from 0,5 mm with gas without burning through — even without a socket.

Without electricity — with
own cylinders

Urgent — master
in 2 hours

3-year warranty
on every seam

Part repair
from 1 200 ₸ per point

Gas welder in Almaty

from 1 500 KZT* per metre of joint

Has a cast-iron radiator cracked, a muffler burned through, or a copper tube leaked? We will weld metal from 0,5 mm with gas without burning through — even without a socket.

Without electricity — with
own cylinders

Urgent — master
in 2 hours

3-year warranty
on every seam

Part repair
from 1 200 ₸ per point

Types of welding
work we do

Welding of steel structures

Heating pipe welding

Gate manufacturing

Installation of railings

Welding of tanks and vessels

Vehicle frame repair

Manufacture of staircases

Copper tube brazing

GET A CONSULTATIONWe will call you back within 3 minutes

Types of welding
work we do

Welding of steel structures

Heating pipe welding

Gate manufacturing

Installation of railings

Copper tube brazing

Vehicle frame repair

Manufacture of staircases

Welding of tanks and vessels

GET A CONSULTATION

We will call you back within 3 minutes

Types of welding
work we do

Welding of steel structures

Heating pipe welding

Gate manufacturing

Copper tube brazing

Welding of tanks and vessels

Vehicle frame repair

Manufacture of staircases

Installation of railings

We will call you back within 3 minutes

Cost of GAS WELDER SERVICES IN ALMATY

SERVICECOSTTIME
Technician call-out within the city (diagnostics)from 3 000 ₸from 1 hour
Minimum order valuefrom 5 000 ₸—
Welding of steel structures (per metre of weld)from 1 500 ₸from 2 hours
Heating/water supply pipe welding (butt joint)from 2 500 ₸from 1 hour
Welding of aluminium products (per item)from 4 000 ₸from 2 hours
Stainless steel welding (per metre of seam)from 2 000 ₸from 1,5 hours
Repair/restoration of parts (per spot)from 1 200 ₸from 1 hour
Gas welding work at height (up to 3 m)+ 30% of the costfrom 2 hours
Urgent call-out (within 2 hours)+ 2 000 ₸—
Consultation by phonefree of charge—
LEAVE A REQUESTWe will call you back within 3 minutes

Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom

Metal from 0,5 mm without burn-through

The torch flame heats evenly — we weld body panels, mufflers and thin pipes

Cast iron, copper and brass

We weld cast iron with heating up to 600 °C, braze copper tubes with hard solder — they hold 30 atm

We work without a power outlet

We deliver 40 L acetylene and oxygen cylinders and 10–15 m hoses — dacha, garage, basement

Gas welder 12+ years

Grade 5–6 craftsman: welding, oxygen cutting up to 100 mm, and copper tube brazing

3-year warranty on the seam

The seam leaked or cracked — we'll re-weld for free, including a repeat visit by the technician

Price by photo before the visit

Send a photo of the part — we'll name the price; minimum order — 5 000 ₸, site visit — from 3 000 ₸

LEAVE A REQUESTWe will call you back within 3 minutes

Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom

The torch flame heats evenly — we weld body panels, mufflers and thin pipes

Metal from 0,5 mm without burn-through

We weld cast iron with heating up to 600 °C, braze copper tubes with hard solder — they hold 30 atm

Cast iron, copper and brass

We deliver 40 L acetylene and oxygen cylinders and 10–15 m hoses — dacha, garage, basement

We work without a power outlet

Grade 5–6 craftsman: welding, oxygen cutting up to 100 mm, and copper tube brazing

Gas welder 12+ years

The seam leaked or cracked — we'll re-weld for free, including a repeat visit by the technician

3-year warranty on the seam

Send a photo of the part — we'll name the price; minimum order — 5 000 ₸, site visit — from 3 000 ₸

Price by photo before the visit

We will call you back within 3 minutes

Преимущества СВАРОЧНЫХ РАБОТ ОТ Profi‑Dom

The torch flame heats evenly — we weld body panels, mufflers and thin pipes

Metal from 0,5 mm without burn-through

We weld cast iron with heating up to 600 °C, braze copper tubes with hard solder — they hold 30 atm

Cast iron, copper and brass

We deliver 40 L acetylene and oxygen cylinders and 10–15 m hoses — dacha, garage, basement

We work without a power outlet

Grade 5–6 craftsman: welding, oxygen cutting up to 100 mm, and copper tube brazing

Gas welder 12+ years

The seam leaked or cracked — we'll re-weld for free, including a repeat visit by the technician

3-year warranty on the seam

Send a photo of the part — we'll name the price; minimum order — 5 000 ₸, site visit — from 3 000 ₸

Price by photo before the visit

We will call you back within 3 minutes

HOW WE WORK

LEAVE A REQUESTWe will call you back within 3 minutes
  1. 01.
    Request and photo

    Send a photo of the crack or part via WhatsApp — we will assess the work and give a price before the visit.

  2. 02.
    Trip with a post

    The technician arrives with acetylene and oxygen cylinders, a torch and a cutter — no outlet needed.

  3. 03.
    Price before start

    On site we confirm the scope and price: minimum order — from 5 000 ₸, no extra charges after work starts.

  4. 04.
    Safe place

    We prepare a 2×2 m area, remove combustibles and open air inflow — we work with an open flame.

  5. 05.
    Part preparation

    We clean the edges and preheat the cast iron to 600 °C — without preheating, the part will crack from the temperature difference.

  6. 06.
    Welding or soldering

    We weld thin metal with gas without burning through, solder copper and brass with hard solder and flux.

  7. 07.
    Slow cooling

    We cool the cast iron part slowly and clean the seams — this way no new cracks appear next to the seam.

  8. 08.
    Inspection and handover

    We check the seam for tightness, clean up the workplace and sign the act — 3 year warranty.

Answer 5 questions and get an estimate accurate to 95%

Find out the cost of a gas welder's work per 1 minute

What work is needed?

What needs to be done?

What metal is the part made of?

Where do we work?

When should work begin?

One last step!

Enter your phone number so we can send you the estimate and reserve your gift!

+7

catalogue of completed welding work

Gas boiler welding in the Alatau microdistrictGas boiler welding in the Alatau microdistrict
A private house owner contacted us about a crack in the boiler body. We carried out argon-arc welding and restored the tightness of the heat exchanger.
25 000kzt
VIEW PROJECT
Muffler repair on a commercial vehicle in Bostandyk districtMuffler repair on a commercial vehicle in Bostandyk district
The cargo van's resonator burned through. The damaged section was replaced, and a stainless steel patch was applied.
12 000kzt
VIEW PROJECT
Manufacturing a metal staircase in a cottage (Almaty, Koktobe district)Manufacturing a metal staircase in a cottage (Almaty, Koktobe district)
The client wanted a reliable structure with forging. We welded the frame from square tubing and installed the railings.
120 000kzt
VIEW PROJECT
Welding a polycarbonate greenhouse at a country house in the Ili districtWelding a polycarbonate greenhouse at a country house in the Ili district
Needed a frame for an arched greenhouse 6×3 m. The arches and crossbars were joined by electric welding, and the seams were treated with primer.
35 000kzt
VIEW PROJECT

FIND OUT THE COST OF WELDING WORK FOR YOUR PROJECT

Leave a request and we will contact you within 3 minutes

+7
Privacy Policy

By clicking the button you agree to the terms of the

Or call us at

+7 (707) 068-88-68
Privacy Policy

FIND OUT THE COST OF WELDING WORK FOR YOUR PROJECT

Leave a request and we will contact you within 3 minutes

+7

By clicking the button you agree to the terms of the

Or call us at

+7 (707) 068-88-68
Privacy Policy

FIND OUT THE COST OF WELDING WORK FOR YOUR PROJECT

Leave a request and we will contact you within 3 minutes

+7

By clicking the button you agree to the terms of the

Or call us at

+7 (707) 068-88-68

Газосварщик Алматы от PROFI‑DOM: сварка, резка и пайка без электричества

PROFI-DOM has a staff gas welder for Almaty and suburbs with his own mobile acetylene-oxygen station, so welding proceeds even without electricity. The master welds thin metal, non-ferrous metals and cast iron, cuts steel up to 100 mm with oxygen, solders copper and brass. City visits — from 3 000 ₸, minimum order — from 5 000 ₸, welding warranty — 3 years.

Who a gas welder is and how they differ from a gas-electric welder

We explain how a gas welding specialist differs from a gas-electric welder and who needs which technician: confusing them is a mistake that costs money and time.

How a gas welder differs from a gas and electric welder

Our specialist works only with gas (acetylene + oxygen) — welds, cuts and solders, while a gas-electric welder additionally masters electric arc welding (MMA). If your task is thin metal (0.5–3 mm), non-ferrous metals (copper, brass), cast iron or work without electricity — you need exactly this kind of master. If you need to weld thick metal from 6 mm, rebar or load-bearing structures — a gas-electric welder. The difference in equipment: the first has an acetylene cylinder, oxygen cylinder, cutter and torch, the second additionally has an inverter and electrodes. In practice this means that a gas welder does not burn through thin sheet, while an electric welder at the same settings makes a hole — for body repair, mufflers, copper tubes and cast iron parts they always call a gas welder. PROFI-DOM's gas welder goes to the site with a full set of cylinders and torches — welds, cuts and solders without electricity.

When you need a gas welder and when you need a gas-electric welder

We have a clear division: a craftsman goes to tasks involving thin metal, non-ferrous metals, cast iron and brazing — for example, welding a crack in a radiator tank, brazing a copper air conditioner tube, or cutting out a burnt-out section of a muffler. If a client needs both to weld a muffler (with gas) and to weld a bracket to a thick channel (with an electrode) at the same time — we send a gas-electric welder with two machines. There is confusion in the Almaty market: ads on OLX.kz say 'gas welder' or 'gas-electric welder Almaty', but often a craftsman arrives who can only work with an electric arc and does not have an acetylene-oxygen station. Check when ordering: does the specialist have his own cutter and cylinders — if not, he will not be able to weld thin metal without burning through.

Gas welder grade and certification — what to look for

Our specialist has 5–6th grade and a valid welder certification. The grade determines what materials and thicknesses the master works with: 3-th grade — simple steel work up to 4 mm, 4-th — carbon steel and basic non-ferrous metals, 5–6-th — non-ferrous metals, cast iron, critical pressure welds (heating pipes, gas mains). Certification confirms that the welder has passed a test for a specific type of work — for example, welding pipes or sheet structures. When ordering in Almaty, ask not only about the grade but also about experience with a specific material: cast iron, for example, requires preheating to 600°C and slow cooling — not every welder, even of 5-th grade, can do this.

What a gas welder can do: welding, cutting, brazing thin metal, non-ferrous metals and cast iron

Gas welding and cutting is not a universal tool but a set of precise technologies for specific metals and thicknesses. Let us look at exactly what the specialist does and in which cases you cannot do without one.

Gas welding of thin sheet (0.5-3 mm) — why gas rather than electricity

PROFI-DOM's gas welder welds thin metal from 0.5 mm without burn-through — this is the main advantage of gas welding over arc welding. The acetylene-oxygen torch flame heats the part evenly rather than pointwise like an electrode, so body panels, thin-walled pipes, galvanized steel and stainless steel up to 3 mm are easier to weld with gas. When welding a muffler on a VAZ-2107, the metal thickness is 0.8–1.2 mm: an electric welder will burn through it in a second, while the specialist runs the seam without overheating the edges. On galvanized gutters, gas welding does not burn away the zinc around the seam — corrosion will not start from the fusion line. If a thin sheet needs to be welded to a frame, the welder will make the seam neat and airtight, while an electric welder at the same settings will burn through the metal — this is especially critical when repairing fuel tanks and body elements.

Gas welding of non-ferrous metals: copper, brass, bronze

At PROFI-DOM, a master welds copper, brass, and bronze with a gas torch using filler from the same metal. For copper we use a neutral flame, for brass an oxidizing one, to avoid porosity of the seam due to zinc evaporation. Non-ferrous metals require precise temperature selection: copper melts at 1083°C and quickly dissipates heat — a powerful №4–5 torch is needed; brass melts at 880–950°C and is easier to overheat. On copper air conditioner tubes (diameter 6.35 and 9.52 mm), brazing with brass filler produces a tight seam that withstands pressure of 25–30 bar. Aluminum is not welded with gas — it requires argon (TIG), so if an aluminum part needs welding, we recommend argon welding; but for copper tubes, brass fittings, and bronze bushings, gas welding remains the optimal option.

Gas welding of cast iron — hot welding with preheating

Our gas welder welds cast iron using the hot method: the part is preheated to 600–650°C with a gas torch, then welded with an МНЧ-2 or ЦЧ-4 grade cast iron rod. Without preheating, cast iron will crack from the temperature difference — this is the main mistake beginners make: with local heating to 1200°C, a tension zone forms around the weld and the part cracks. Soviet-style toilet cisterns (СМД, "Compact") crack along the stiffening rib — hot welding restores tightness without deformation. For sewer pipes with a diameter of 100 mm and МС-140 radiators operating at pressures up to 6 atm, the hot method is mandatory, followed by slow cooling — in a thermostat or under a layer of sand for 4–6 hours. Cold welding of cast iron (without preheating) is only possible for non-critical parts, such as decorative grilles that bear no load.

Gas cutting of metal with oxygen — up to 100 mm thick

Our gas welder cuts metal with an oxygen cutter — steel up to 100 mm thick. For cutting, acetylene (or propane) is used to heat to the ignition temperature (about 900°C) and an oxygen jet at 4–6 atm pressure to burn through the metal. The cut comes out even, and scale from the edge after cutting is removed by cleaning. At sites without electricity (a construction site in the Aksai-2 microdistrict, a garage cooperative in Alatau), a gas cutter is the simplest way to cut №20 channel or 20 mm steel sheet for a lintel. If you need to cut an old steel bathtub during removal, a 10 mm metal sheet or 32 mm diameter rebar — a welder with a cutter will handle it in 10–15 minutes on site. Oxygen cutting works only on carbon and low-alloy steel: cast iron, stainless steel and aluminum are not cut this way — they require a plasma cutter or an angle grinder.

Gas brazing with copper, brass and silver — how it differs from welding

Our gas welder brazes copper and brass parts with hard solder (copper, brass or silver) with flux — unlike welding, during brazing the base metal does not melt, only the solder melts and flows into the gap due to the capillary effect. The gap for brazing copper tubes is 0.05–0.15 mm: with a larger gap, capillary suction does not work and the joint leaks. On copper tubes of air conditioners (LG, Samsung, Daikin split systems), gas brazing with PSr-40 silver solder provides the strongest and most corrosion-resistant joint, withstanding pressures up to 40 bar. Copper solder (MF-9) is cheaper but requires a temperature of 700–800°C and gives a less ductile seam — suitable for cold water supply pipes. Brass solder (L-63) is a universal option for steel and cast iron when brazing heating radiators. Silver solder is also used on other critical components — heat exchangers and capillary tubes of refrigerators.

Calling a gas welder to your home or site: working without electricity using a mobile station

The gas welder comes to a home or site in Almaty with his own mobile station and works where there is no power outlet — at a dacha, on a construction site, in a garage, in a basement without light.

Mobile acetylene-oxygen station — what the specialist brings along

Our gas welder goes to the site with a full mobile acetylene-oxygen station: two cylinders (acetylene 40 l and oxygen 40 l) on a trolley, regulators with check valves, gas hoses 10–15 m long, a GS-2 type welding torch and an RZ-2 type cutter. The cylinders undergo periodic inspection once every 5 years. The master also brings filler rods of brass, cast iron and steel of various sections, fluxes for copper brazing, a mask with a GP-7 filter and an asbestos gasket to protect adjacent elements from heating. Having your own station is the main sign of a professional: private traders from OLX often arrive with a single propane cylinder and a household torch, which gives heating rather than welding, so when ordering, check whether they have their own acetylene and oxygen — a real master brings at least 80 kg of equipment.

Work without electricity — where it is needed

Our gas welder works fully autonomously — without electricity, since the acetylene-oxygen flame does not require a socket, so we weld and cut at dachas in the villages of Kargaly, Kokkainar, Irgeli, at construction sites without power connections in the Aksai and Alatau microdistricts, in basements and on the roofs of private houses. This is the key difference from an electric welder, who needs a 50 m extension cord or a gasoline generator with the risk of voltage surges, noise and exhaust smell. A gas welder works quietly, without vibration and does not depend on the quality of the grid — for dachas, garages and remote sites this is the only option for quality welding of thin metal and non-ferrous metals, especially if the site is more than 15 km from the city.

Urgent technician visit across the city today

An urgent visit by a gas welder is possible on the day of order — the master arrives at the site within 2 hours, an urgent visit according to the price list is plus 2 000 ₸. For an urgent order, specify which gas is needed: acetylene for welding and soldering thin metal, brass or cast iron, or propane for cutting and heating thick workpieces — if the master brings only propane, they will not be able to weld a radiator body or a copper tank with quality, so a true specialist always carries acetylene.

What a gas welder repairs: tanks, radiators, tubes, silencers and more

Let us look at the typical tasks people come to us with — from cast-iron cisterns to silencers and copper tubes. Each case requires its own technology and preparation.

Repair of cast iron toilet cisterns and radiators

Our gas welder repairs cast-iron toilet tanks and heating radiators with hot gas welding. We weld a crack in the tank with a cast-iron rod with preheating to 600°C — after cooling, the seam holds water pressure without leaks for years. Heating radiators (sectional cast-iron MS-140) are welded on site, without dismantling, if access to the crack is available — this saves 2-3 hours on removal and reinstallation. For thick-walled tanks (4-6 mm) we use heating of the entire part in a assembly furnace to avoid internal stresses and repeated cracks near the seam. Do not try to weld a cast-iron tank with cold welding or epoxy — this gives a temporary effect for 1-2 months, while gas welding with heating restores tightness for years; cracks up to 5 cm are usually welded without replacing the part.

Muffler and exhaust system repair

Our gas welder welds mufflers and exhaust pipes with gas welding — thin metal (0.8-1.5 mm) does not burn through, and the seam comes out airtight and ductile. Unlike argon welding (TIG), gas welding does not require perfect cleaning from rust: the acetylene-oxygen flame burns off the deposit, and the seam lies even on old corroded metal, which is critical for mufflers 5-10 years old. A pinhole or a burnt-through area up to 5-7 cm on the resonator or main canister is welded in 15-20 minutes without removing the muffler from the car — this is 3-4 times cheaper than buying a new unit for 25-40 thousand ₸. If the muffler has rusted to dust along its entire length, welding is useless and replacement is needed, but for local defects gas welding remains the optimal option in terms of price and reliability.

Brazing copper tubes of air conditioners and refrigerators

Our gas welder brazes copper tubes of air conditioners and refrigeration equipment with hard solder (copper or PSr-40 silver) with flux — the joint withstands refrigerant pressure up to 30 atm without leaks. For brazing we use an acetylene-oxygen torch with a small flame (flame diameter 5-8 mm) to avoid overheating adjacent elements — capillaries, thermostats, or plastic tube sheaths. Important: for brazing copper tubes of air conditioners, you must not use soft tin solder (with a 250°C soldering iron) — it will not withstand compressor vibration and freon pressure, and the seam will leak within 2-3 months. Only hard solder with a melting point of 700-800°C and mandatory flux (borax or a specialized brazing flux) ensures hermeticity for the entire service life of the air conditioner — with a propane torch without flux, the seam becomes porous and unreliable.

Cutting up old bathtubs, welding heating pipes and other tasks

Our gas welder cuts old steel bathtubs into pieces with an oxygen cutter — for removal through doorways 60-70 cm wide. We cut a steel bathtub into 3-4 fragments in 20-30 minutes, after draining the water and disconnecting the siphon. Cast iron does not yield to oxygen cutting, so a cast-iron bathtub (weighing 80-120 kg) is cut with an angle grinder or broken into pieces — this way it is also removed without damaging walls and door frames. We also weld heating and water supply pipes with gas welding: steel pipes up to 2 inches (VGP 15-50 mm), butt or lap welding followed by checking the seam with soap solution under pressure. When installing heating, gas welding is chosen when pipes run in hard-to-reach places or near wooden structures — the flame can be directed precisely without setting walls on fire, and for steel pipes gas welding gives a more ductile seam than electric arc welding, which is critical with thermal expansion of up to 1.2 mm per metre of pipe.

Gas welder service prices: per seam, per part, per cut, per visit

The master's work is calculated differently — per seam, per part, per cut and per call-out. Below we break down how the cost is formed and provide rates for typical work.

How the price is formed: per weld, per part, per cut, per visit

At PROFI-DOM the price consists of four parameters: the cost of a seam (₸ per meter or point), parts (₸ per unit), cutting (₸ per cut) and a call-out (₸ per zone). The seam is used for welding and soldering — long joints are calculated by meters, short repairs by points, and the price depends on metal thickness and filler type: 0.5–3 mm steel is cheaper than copper or brass, where flux is more expensive. A part is fixed work on a specific item: a cast-iron tank, radiator, muffler, where complexity is set by the design, not the seam length. Cutting is cutting metal with oxygen, charged per cut regardless of length within a meter, and a call-out within the city is fixed, to the suburbs up to 20 km — by address. The minimum order is 5000 ₸: for one short seam the total will not be cheaper than this amount, but for a volume from 10 meters of seam an individual discount applies, and the seam price already includes gas, filler and flux with no surcharges.

Price list for the specialist's main services

LabourWhat we weld and cutUnit (weld/part/cut/visit)Price from, ₸
Gas welding of metal structuresSteel, galvanizedSeam (meter)1500
Gas welding of stainless steelStainless steelSeam (meter)2000
Repair of thin sheet (0.5-3 mm) and non-ferrous metalsSteel, copper, brass, bronzePoint1200
Gas welding of cast iron (hot)Tanks, radiators, pipesPart (pcs.)3000
Welding of heating and water supply pipes15-50 mm galvanized steel pipesJoint2500
Oxygen metal cuttingSteel up to 100 mmCutting (cut)500
Cutting a bathtub into piecesSteel bathtub (cast iron — with an angle grinder)Part (pcs.)5000
Muffler repairSteel 0.8-1.5 mmPart (pcs.)2500
On-site visit in Almaty—Site visit3000
Call-out to the suburbs (up to 20 km)—Site visitat the address
Minimum order——5000

Prices are indicated for labor with the customer's material — if our metal or filler is needed, the cost of consumables is added. For an accurate calculation, send a photo of the part: the specialist will assess the metal thickness, access difficulty, and urgency.

How much does a specific job cost — calculation examples

Example: welding a crack on a 2 mm steel sheet — repair point (1200 ₸) + 3000 ₸ visit = 4200 ₸, but with a minimum order of 5000 ₸ the total will be 5000 ₸, and if a patch is also cut from your metal (cutting — 500 ₸), the amount of 4 700 ₸ will still fit within the minimum order. Another case: welding a broken ear onto a cast-iron toilet tank — part (3000 ₸) + visit (3000 ₸) = 6000 ₸ — this is more than the minimum order. To avoid paying for the visit twice, group all small tasks into one visit: weld a crack on the tank, tack a hinge on the gate and cut off a protruding rebar corner — one visit, and the scope of work will cover the minimum order with a margin.

How to order a gas welder in Almaty — urgently, on-site, without a power socket

We will explain how to quickly call a gas welding master, which districts and suburbs we travel to, what is needed for work at the site and how to place a request on the day you call.

Almaty and suburbs: service area up to 20 km

Our gas welder travels to all eight districts of Almaty — Alatau, Almaly, Auezov, Bostandyk, Zhetysu, Medeu, Nauryzbai, Turksib — and to the suburbs up to 20 km from the city (Kargaly, Otegen-batyr, Irgeli, Abai, Boralday). Travel to all city districts — from 3000 ₸, to the suburbs — more expensive: we will name the exact amount by address before the visit. A photo of the part in WhatsApp or Telegram will help the master immediately understand whether one cylinder is enough for the scope of work, and you won't have to pay extra for a repeat visit.

Urgent call-out — we will arrive today

Urgent call-out of a gas welder is possible on the day of request: urgent visit within 2 hours — plus 2 000 ₸ according to the price list, scheduled — at an agreed time. We accept urgent requests by phone, WhatsApp or Telegram — the dispatcher will immediately assess the master's workload and give the exact arrival time. If the part can be removed and brought to our workshop (e.g., a muffler, tank, radiator), the work will be done faster than with a call-out and without a travel fee — saving from 3000 ₸ on the visit.

What is needed for the job — cylinders, electricity, space

Our gas welder arrives with his own mobile acetylene-oxygen station — acetylene and oxygen cylinders, torches, regulators, hoses up to 15 meters long. No electricity is needed for the work — welding is fully autonomous, only a flat area of 2×2 meters outdoors or in a ventilated room (garage with open gates, canopy, construction site) is required. If work is carried out in a basement or ground floor — ensure air inflow: open the hatch, door or turn on forced ventilation. The master uses an open flame, so there should be no flammable liquids (gasoline, solvent, oils) nearby — this is basic safety that is often neglected during urgent calls.

Conclusion

We have gathered the essentials you need to know before calling a gas welding master in Almaty, so you do not overpay and get a quality seam the first time.

Key takeaways

  • Gas welder — a specialist in thin metal, non-ferrous alloys and cast iron. If the part is made of steel up to 3 mm, copper, brass or cast iron — gas welding gives a neat seam without burn-through.
  • Gas welding works without electricity. This is the main advantage when repairing at a country house, in a garage or on a site with no socket — cylinders of acetylene and oxygen are all you need.
  • The price consists of the weld length, complexity, and call-out. Repairing a part — from 1 200 ₸ per spot + call-out. The minimum order is 5000 ₸, so it is cost-effective to group several tasks into one visit.
  • An urgent call is possible on the day of request. Urgent visit — within 2 hours, plus 2 000 ₸ according to the price list. To save money, you can remove the part and bring it to the workshop — with no visit fee.

About the author

Viktor Li

Gas welder of the PROFI-DOM workshop in Almaty. Gas (acetylene-oxygen) welding, cutting and brazing of metal: thin sheet, copper, brass, cast iron, pipes and tanks; mobile station and call-out without electricity.

More than 12 years with a gas torch and cutting torch; welding non-ferrous metals and cast iron, brazing copper tubes and radiators, gas cutting of metal, call-outs across Almaty.

Frequently asked questions
ABOUT THE GAS WELDER IN ALMATY

How much does a gas welder house call in Almaty cost?
Technician call-out within the city — from 3 000 tenge, urgent call-out within 2 hours — plus 2 000 tenge. The welding work itself is paid separately and calculated based on complexity and scope.
Can a cast iron radiator be welded?
Yes, if the crack is accessible: we weld cast iron using the hot method with heating to 600 °C and slow cooling. Cracks up to 5 cm are usually welded without replacing the section.
How long does muffler repair take?
We weld a pinhole or burnt-through area up to 5–7 cm in 15–20 minutes, often without removing the muffler from the car. If the muffler is rusted through along its entire length, replacement is needed.
How to choose a good gas welder in Almaty?
Pay attention to the availability of certificates and experience specifically with gas equipment. It is best to choose a master based on recommendations or from trusted services, as your safety depends on the quality of the welding.
Does a gas welder travel outside Almaty?
Yes, we travel to the suburbs up to 20 km from the city: Kargaly, Irgeli, Boralday and others. We will quote the travel cost for your address in advance.
What warranty does a gas welder give for completed work?
We give a 3-year warranty on every weld: if it leaks or cracks, we'll re-weld it for free.
Can you weld with gas in a basement or garage?
Yes, if there is air inflow: open the door or hatch and remove gasoline, solvents, and oils — the specialist works with an open flame.
Can I bring the part to the workshop?
Yes, you can bring the muffler, tank or radiator to us — the work will be done faster and without a call-out fee.
Phone:+7 (707) 068-88-68Our address:Almaty, Makataev St., 47, office 325 (Partner Business Centre)Daily: 9:00–21:00 (by appointment)