PROFI-DOM — construction company +7 700 499 59 62
ENRUKZ

Sliding gates Almaty

calculate the cost of sliding gates

Reliable gates with automation and protection from any weather conditions to guarantee the safety of your property

  • Service life of 17 years with daily use
  • Affordable prices thanks to our own production
  • Official warranty — 2 years
  • Increased corrosion resistance

Sliding gates Almaty

Reliable gates with automation and protection from any weather conditions to guarantee the safety of your property

Service life of 17 years with daily use

Affordable prices thanks to our own production

Official warranty — 2 years

Increased corrosion resistance

Sliding gates Almaty

Reliable gates with automation and protection from any weather conditions to guarantee the safety of your property

Service life of 17 years with daily use

Affordable prices thanks to our own production

Official warranty — 2 years

Increased corrosion resistance

Answer 7 questions and get an estimate accurate to 95%

Find out the construction cost and timeframe in 1 minute

What type of gate infill are you interested in?

What colour of infill would you like?

Do you need an electric drive?

Enter the gate height

Enter the gate width

Select additional options

Do you need installation?

One last step!

You can view the results as soon as you enter and send your number!

+7

Why 98% residents of Kazakhstan order sliding gates from us

LIGHT AND durable

We manufacture sliding gates from a light and strong material. This reduces the load on the support posts. And thanks to reduced wear, the service life of the gates is extended

They do not rust for a long time in any climate

We select materials that are resistant to corrosion, which allows Profi-dom gates to resist rust for a long time

Resistant to external influences

We use only high-quality paint and varnish components. Thanks to the durable coating, the gates are not affected by rain, snow or chemical reagents

Retain their geometry

The design of our gates is prefabricated. Instead of welding, we use corner connectors from leading hardware manufacturers. The absence of welded seams frees the gates from potential sources of corrosion

No dismantling required

Thanks to the prefabricated design, PROFI-DOM gates can be repaired right on site. It is enough to replace the damaged element

Operate silently

Thanks to the lightweight frame of the sliding gates and support rollers made of glass-filled polyamide, automatic and manual gates open smoothly and silently

LEAVE A REQUESTWe will call you back within 3 minutes

Why 98% residents of Kazakhstan order sliding gates from us

We manufacture sliding gates from a light and strong material. This reduces the load on the support posts. And thanks to reduced wear, the service life of the gates is extended

LIGHT AND durable

We select materials that are resistant to corrosion, which allows Profi-dom gates to resist rust for a long time

They do not rust for a long time in any climate

We use only high-quality paint and varnish components. Thanks to the durable coating, the gates are not affected by rain, snow or chemical reagents

Resistant to external influences

The design of our gates is prefabricated. Instead of welding, we use corner connectors from leading hardware manufacturers. The absence of welded seams frees the gates from potential sources of corrosion

Retain their geometry

Thanks to the prefabricated design, PRofi- dom gates can be repaired right on site. It is enough to replace the damaged element

No dismantling required

Thanks to the lightweight frame of the sliding gates and support rollers made of glass-filled polyamide, automatic and manual gates open smoothly and silently

Operate silently

We will call you back within 3 minutes

Why 98% residents of Kazakhstan order sliding gates from us

We manufacture sliding gates from a light and strong material. This reduces the load on the support posts. And thanks to reduced wear, the service life of the gates is extended

LIGHT AND durable

We select materials that are resistant to corrosion, which allows Profi-dom gates to resist rust for a long time

They do not rust for a long time in any climate

We use only high-quality paint and varnish components. Thanks to the durable coating, the gates are not affected by rain, snow or chemical reagents

Resistant to external influences

The design of our gates is prefabricated. Instead of welding, we use corner connectors from leading hardware manufacturers. The absence of welded seams frees the gates from potential sources of corrosion

Retain their geometry

Thanks to the prefabricated design, PRofi- dom gates can be repaired right on site. It is enough to replace the damaged element

No dismantling required

Thanks to the lightweight frame of the sliding gates and support rollers made of glass-filled polyamide, automatic and manual gates open smoothly and silently

Operate silently

We will call you back within 3 minutes

What gates we manufacture

Sliding gates made of corrugated sheeting

A popular type of gate. Depending on the infill, they can be divided into: sliding gates made of corrugated sheet with single-sided infill and sliding gates made of corrugated sheet with double-sided infill

made of metal picket fence

Gates can be manufactured with either single-sided or double-sided infill. The most popular are sliding gates with double-sided infill

Sliding gates made of 3D mesh

Gates are gaining particular popularity thanks to their elegant appearance. High-quality 3d mesh with a polymer coating is used in production. The mesh can be any colour at the customer's request

Sliding gates made of chain-link mesh

A type of gate often used to fence off construction sites. In private construction it is used for subsequent conversion, because this frame is suitable for cladding with any material

Sliding gates with a built-in wicket gate

A solution we use when the opening is narrow. The gates can be manufactured with almost any infill. The only limitation is the gate height, which must be at least 1,9 m. Then access through the wicket will be comfortable

with louvre infill

A design that combines reliability, practicality and beauty. Horizontal metal plates positioned at a slight angle to each other guarantee a greater arsenal of reliability than other materials

Ranch sliding gates

The gates will not catch the wind like a sail in strong gusts. Strength - the slats in Rancho gates are made of galvanised metal. The arrangement of the slats distributes the load, making the gates vandal-resistant without overloading them.

LEAVE A REQUESTWe will call you back within 3 minutes

What gates we manufacture

Sliding gates made of corrugated sheeting

A popular type of gate. Depending on the infill, they can be divided into: sliding gates made of corrugated sheet with single-sided infill and sliding gates made of corrugated sheet with double-sided infill

made of metal picket fence

Gates can be manufactured with either single-sided or double-sided infill. The most popular are sliding gates with double-sided infill

Sliding gates made of 3D mesh

Gates are gaining particular popularity thanks to their elegant appearance. High-quality 3d mesh with a polymer coating is used in production. The mesh can be any colour at the customer's request

Sliding gates made of chain-link mesh

A type of gate often used to fence off construction sites. In private construction it is used for subsequent conversion, because this frame is suitable for cladding with any material

Sliding gates with a built-in wicket gate

A solution we use when the opening is narrow. The gates can be manufactured with almost any infill. The only limitation is the gate height, which must be at least 1,9 m. Then access through the wicket will be comfortable

with louvre infill

A design that combines reliability, practicality and beauty. Horizontal metal plates positioned at a slight angle to each other guarantee a greater arsenal of reliability than other materials

Ranch sliding gates

The gates will not catch the wind like a sail in strong gusts. Strength - the slats in Rancho gates are made of galvanised metal. The arrangement of the slats distributes the load, making the gates vandal-resistant without overloading them.

We will call you back within 3 minutes

What gates we manufacture

Sliding gates made of corrugated sheeting

A popular type of gate. Depending on the infill, they can be divided into: sliding gates made of corrugated sheet with single-sided infill and sliding gates made of corrugated sheet with double-sided infill

made of metal picket fence

Gates can be manufactured with either single-sided or double-sided infill. The most popular are sliding gates with double-sided infill

Sliding gates made of 3D mesh

Gates are gaining particular popularity thanks to their elegant appearance. High-quality 3d mesh with a polymer coating is used in production. The mesh can be any colour at the customer's request

Sliding gates made of chain-link mesh

A type of gate often used to fence off construction sites. In private construction it is used for subsequent conversion, because this frame is suitable for cladding with any material

Sliding gates with a built-in wicket gate

A solution we use when the opening is narrow. The gates can be manufactured with almost any infill. The only limitation is the gate height, which must be at least 1,9 m. Then access through the wicket will be comfortable

with louvre infill

A design that combines reliability, practicality and beauty. Horizontal metal plates positioned at a slight angle to each other guarantee a greater arsenal of reliability than other materials

Ranch sliding gates

The gates will not catch the wind like a sail in strong gusts. Strength - the slats in Rancho gates are made of galvanised metal. The arrangement of the slats distributes the load, making the gates vandal-resistant without overloading them.

We will call you back within 3 minutes

Profi-dom gates — the choice for industrial facilities

Sliding gates are the optimal solution for the territory of industrial, logistics and other facilities. Our gates are designed for intensive use and are resistant to misalignment and corrosion

For any property

Opposing sliding gates will cover an opening up to 9 m wide. The design can be chosen from 8000+ options

service life — 25 000 opening cycles

This was achieved thanks to our engineering developments. The lightweight yet sturdy frame is protected from distortion

Rust protection

Thanks to the use of aluminium and other durable materials and the absence of welded seams, the gates are almost immune to corrosion

Profi-dom gates — the choice for industrial facilities

Sliding gates are the optimal solution for the territory of industrial, logistics and other facilities. Our gates are designed for intensive use and are resistant to misalignment and corrosion

For any property

Opposing sliding gates will cover an opening up to 9 m wide. The design can be chosen from 8000+ options

service life — 25 000 opening cycles

This was achieved thanks to our engineering developments. The lightweight yet sturdy frame is protected from distortion

Rust protection

Thanks to the use of aluminium and other durable materials and the absence of welded seams, the gates are almost immune to corrosion

Profi-dom gates — the choice for industrial facilities

Sliding gates are the optimal solution for the territory of industrial, logistics and other facilities. Our gates are designed for intensive use and are resistant to misalignment and corrosion

Opposing sliding gates will cover an opening up to 9 m wide. The design can be chosen from 8000+ options

For any property

This was achieved thanks to our engineering developments. The lightweight yet sturdy frame is protected from distortion

service life — 25 000 opening cycles

Rust protection

Thanks to the use of aluminium and other durable materials and the absence of welded seams, the gates are almost immune to corrosion

We manufacture sliding gates to custom designs

If standard solutions do not suit you, we can manufacture gates with a design that works for you. Our experienced installers will suggest options based on your parameters, or together you will work out a solution for your project.

By clicking the button you agree to the terms of the

Or call us at

+7 700 499 59 62
Privacy Policy

We manufacture sliding gates to custom designs

If standard solutions do not suit you, we can manufacture gates with a design that works for you. Our experienced installers will suggest options based on your parameters, or together you will work out a solution for your project.

FREE CONSULTATION

By clicking the button you agree to the terms of the

Or call us at

+7 700 499 59 62
Privacy Policy

We manufacture sliding gates to custom designs

If standard solutions do not suit you, we can manufacture gates with a design that works for you. Our experienced installers will suggest options based on your parameters, or together you will work out a solution for your project.

FREE CONSULTATION

By clicking the button you agree to the terms of the

+7 700 499 59 62

Or call us at

We deliver standard solutions and complex custom designs

Installed 500+ sliding gates in 2020 - 2024

Price list for sliding gates

SERVICECost (kzt)
MANUFACTURE OF SLIDING GATES
Basic configuration (up to 4 m, without automation)280 000 - 350 000
Premium package (up to 4 m, with finishing)380 000 - 450 000
Surcharge for increasing the gate width (for each metre over 4 m)40 000 - 60 000
AUTOMATION
Installation of automation (basic set)120 000 - 180 000
Installation of automation (premium set)200 000 - 280 000
INSTALLATION WORK
Sliding gate installation (standard installation)70 000 - 90 000
Pouring the foundation40 000 - 60 000
ADDITIONAL SERVICES
Wicket gate in the gate leaf60 000 - 90 000
Remote control (1 remote)15 000 - 25 000
Travel outside the city (per km)500 - 1000
MAINTENANCE SERVICE
Warranty serviceFree 12 months
Maintenance service (after warranty)from 20 000
LEAVE A REQUESTWe will call you back within 3 minutes

Book a free measurement

+7
Privacy Policy

By clicking the “Get a loan” button you agree to the terms

We will determine the right size of sliding gates to the nearest millimetre. The measurement does not oblige you to make a purchase

Book a free measurement

+7

By clicking the “Get a loan” button you agree to the terms

Privacy Policy

We will determine the right size of sliding gates to the nearest millimetre. The measurement does not oblige you to make a purchase

By clicking the “Get a loan” button you agree to the terms

+7

Book a free measurement

Privacy Policy

We will determine the right size of sliding gates to the nearest millimetre. The measurement does not oblige you to make a purchase

Types of sliding gates

Overhead systems

They are used for setting up industrial enterprise facilities. The downsides noted are high prices, as well as the opening and gate leaf exceeding the height of the vehicle body

01

cantilever systems

The most common type, they have no contact with the ground, which extends their service life and simplifies maintenance. The drawbacks noted are the complexity of installation

02

Rail systems

The rollers at the bottom of the leaf move along rails. They do not restrict vehicle height. But the leaves wear out under their own weight, and the rails must be kept clear of precipitation

03

Types of sliding gates

They are used for setting up industrial enterprise facilities. The downsides noted are high prices, as well as the opening and gate leaf exceeding the height of the vehicle body

01

Overhead systems

The most common type, they have no contact with the ground, which extends their service life and simplifies maintenance. The drawbacks noted are the complexity of installation

02

cantilever systems

The rollers at the bottom of the leaf move along rails. They do not restrict vehicle height. But the leaves wear out under their own weight, and the rails must be kept clear of precipitation

03

Rail systems

Types of sliding gates

They are used for setting up industrial enterprise facilities. The downsides noted are high prices, as well as the opening and gate leaf exceeding the height of the vehicle body

01

Overhead systems

The most common type, they have no contact with the ground, which extends their service life and simplifies maintenance. The drawbacks noted are the complexity of installation

02

cantilever systems

The rollers at the bottom of the leaf move along rails. They do not restrict vehicle height. But the leaves wear out under their own weight, and the rails must be kept clear of precipitation

03

Rail systems

Stages of sliding gate installation in Almaty

01.

Step 1

Foundation preparation. A channel bar with welded reinforcement is lowered into the trench along the line of the opening. For automatic sliding gates, a corrugated conduit with a power cable is laid, then the trench is filled with concrete

02.

Step 2

Installation of the roller supports on the mounting plate. And adjustment of the position of the trolleys relative to the mounting frame and the opening.

03.

Step 3

Installation of the leaf. Welding of the frame structure from square tubing, coating with primer-enamel or painting.

04.

Step 4

Connecting the automation. Welding on the toothed rack so that the leaf moves in the lower part of the structure.

Stages of sliding gate installation in Almaty

Step 1

Foundation preparation. A channel bar with welded reinforcement is lowered into the trench along the line of the opening. For automatic sliding gates, a corrugated conduit with a power cable is laid, then the trench is filled with concrete

01.

Step 2

Installation of the roller supports on the mounting plate. And adjustment of the position of the trolleys relative to the mounting frame and the opening.

02.

Step 3

Installation of the leaf. Welding of the frame structure from square tubing, coating with primer-enamel or painting.

03.

Step 4

Connecting the automation. Welding on the toothed rack so that the leaf moves in the lower part of the structure.

04.

Stages of sliding gate installation in Almaty

Step 1

Foundation preparation. A channel bar with welded reinforcement is lowered into the trench along the line of the opening. For automatic sliding gates, a corrugated conduit with a power cable is laid, then the trench is filled with concrete

01.

Step 2

Installation of the roller supports on the mounting plate. And adjustment of the position of the trolleys relative to the mounting frame and the opening.

02.

Step 3

Installation of the leaf. Welding of the frame structure from square tubing, coating with primer-enamel or painting.

03.

Step 4

Connecting the automation. Welding on the toothed rack so that the leaf moves in the lower part of the structure.

04.

Smart automation for your sliding gates

Modern sliding gate automation systems are a combination of reliability and safety. Our company offers only time-tested solutions from leading manufacturers

GET A CONSULTATION

Gate control options

Remote controls with anti-burglary protection

Keypads and access card readers

Mobile app with notifications for every opening

video intercom and CCTV system

When designing the system, we take into account the intensity of use, the size of the structure and the client's specific wishes. We will find the optimal solution both for a private house and for an industrial facility with heavy traffic

Smart automation for your sliding gates

Modern sliding gate automation systems are a combination of reliability and safety. Our company offers only time-tested solutions from leading manufacturers

GET A CONSULTATION

Gate control options

Remote controls with anti-burglary protection

Keypads and access card readers

Mobile app with notifications for every opening

video intercom and CCTV system

When designing the system, we take into account the intensity of use, the size of the structure and the client's specific wishes. We will find the optimal solution both for a private house and for an industrial facility with heavy traffic

Smart automation for your sliding gates

Modern sliding gate automation systems are a combination of reliability and safety. Our company offers only time-tested solutions from leading manufacturers

Gate control options

Remote controls with anti-burglary protection

Keypads and access card readers

Mobile app with notifications for every opening

video intercom and CCTV system

When designing the system, we take into account the intensity of use, the size of the structure and the client's specific wishes. We will find the optimal solution both for a private house and for an industrial facility with heavy traffic

Sliding gates

Sliding gates in Almaty from PROFI-DOM: types, automation, installation

PROFI-DOM manufactures three types of sliding gates: cantilever, roller on a rail and suspended; for Almaty, cantilever ones are more often suitable — without the lower rail that gets clogged with dirt and snow. The basic package up to 4 m wide without automation — from 280 000 ₸, installation of automation — from 120 000 ₸, installation — from 70 000 ₸.

Types of structures

The modern market offers a wide variety of sliding gates, differing in design, materials and opening method. Before choosing a specific model, it is important to understand the main types so as to pick the best option that blends harmoniously with the architecture of your house and the features of the plot.

Cantilever gates: reliability and durability without height restrictions

Cantilever gates are perhaps the most common and practical option. Their key feature is that no lower guide rail is needed. The leaf moves on roller carriages fixed to a concreted beam located to the side of the opening. This design solution provides a number of significant advantages:

  • Unobstructed passage: the absence of a bottom rail eliminates the accumulation of dirt, snow, and ice, ensuring smooth and reliable operation at any time of year. You won't have to spend time and effort cleaning the opening before every entry or exit.
  • Unlimited height: the cantilever system allows installing a curtain of any height, which is especially important for sites where large vehicles need to pass through.
  • High reliability and durability: thanks to a well-thought-out design and the use of quality materials, cantilever gates have a significant service life and can withstand intensive use.

Sliding gates on rollers along a rail: simplicity and economy

This type is more traditional and stands out for its simple design. The leaf moves on rollers installed at the bottom, which roll along a metal rail concreted flush with the ground. The upper part is supported by guide rollers. The advantages of this option include:

  • Ease of installation: installing such a gate usually doesn't require complex preparatory work and takes less time.
  • Cost-effectiveness: as a rule, gates on rollers along a rail cost less than cantilever analogues.

However, some drawbacks should also be taken into account:

  • The need to clean the rail: the lower rail is prone to contamination, which can hinder movement. This is especially relevant in winter or after heavy rain.
  • Height restriction for passage: the presence of an upper guide may limit the height of passing vehicles.

Suspended gates: a rare but elegant solution

Suspended gates are a structure in which the leaf moves along a roller system fixed in the upper part of the opening (with a top suspension). The lower part remains free. This option features an elegant appearance but has a number of limitations:

  • Height limitation: the top guide significantly limits the height of passing vehicles.
  • Installation complexity: installing overhead doors requires high precision and qualified installers.
  • High cost: as a rule, suspended gates are the most expensive option.

Given the climate specifics and common requirements in Almaty, cantilever sliding gates often turn out to be the optimal choice, combining reliability, ease of operation, and no height restrictions.

Materials and design

Choosing the material and design of sliding gates is not only a matter of aesthetics but also of practicality. The material determines strength, durability and resistance to atmospheric influences, while the design allows it to fit harmoniously into the architectural ensemble of your plot.

Metal gates: strength and durability for many years

Metal is the most popular material thanks to its strength, durability and relatively low cost. The following can be used as cladding for the leaf:

  • Corrugated sheet: a lightweight, durable, and inexpensive material with a wide color range. Such sliding gates for a dacha are a practical and economical option.
  • Metal picket fence: provides good ventilation and visibility while maintaining a sense of privacy. Offers various profile and coating options.
  • Sandwich panels: offer excellent thermal and sound insulation, as well as an attractive appearance.
  • Forged elements: add sophistication and individuality, emphasizing the owner's status. Forged flowers and patterns can become a true decoration of your plot.

PROFI-DOM offers a wide selection of metal sliding gates in Almaty, made from high-quality materials using modern metal processing technologies.

Wooden gates: eco-friendliness and natural beauty

Wooden gates are distinguished by their environmental friendliness and unique natural beauty. They are well suited for houses in a classical or rustic style. However, it is worth considering that wood requires regular maintenance and protection from moisture, fungus and insects. Modern impregnations and paint-and-varnish materials can significantly extend the service life of wooden gates while preserving their attractive appearance.

Combined gates: the strength of metal and the beauty of wood

Combined gates are a solution for those who want to combine the strength of metal with the aesthetics of wood or polycarbonate. For example, a metal frame with wooden cladding will ensure the reliability of the structure and an attractive appearance. Polycarbonate inserts can add lightness and let light through.

When choosing a design, it is important to consider the architectural style of your home and the landscape design of the plot. Our specialists will help you choose the optimal color scheme and texture so that the new gates fit harmoniously into the surrounding space.

Automation for sliding gates

An automatic drive on sliding gates is an investment in convenience and safety: arriving home in bad weather, you open the gate without getting out of the car.

Automatic sliding gates: convenience, safety and time saving

  • Comfort: opening and closing are performed with one press of a button on the remote control, which is especially convenient in rainy or snowy weather.
  • Safety: modern automatic drives are equipped with safety systems such as photocells that prevent closing when an obstacle is detected in the opening. Automation also makes unauthorized entry into the territory more difficult.
  • Time saving: you no longer need to spend time opening and closing manually, especially if you frequently enter and leave the territory.
  • Increased property value: having automation increases the appeal and value of your home.

Main components of the automatic system: drive, control unit and accessories

The standard automation kit includes:

  • Electric drive: the main element of the system that ensures the movement of the fabric. The choice of drive depends on the weight and dimensions of the fabric, as well as on the intensity of use.
  • Control unit: an electronic module that controls the operation of the drive, receives signals from remote controls and provides connection of additional safety devices.
  • Remote controls: devices for remote opening and closing.
  • Photocells: safety sensors that detect obstacles in the opening and prevent the gate from closing when there is an obstruction.
  • Signal lamp: warns about the start of movement.

At the customer's request, the automatic system can be supplemented with other accessories, such as keypads, GSM modules for control from a mobile phone, as well as devices for integration with smart home systems.

PROFI-DOM works with trusted automation manufacturers and selects a kit suited to Almaty's climate, your needs and budget.

Installation of sliding gates

High-quality installation of sliding gates is the key to their reliable and long-lasting operation. The installation of such a complex structure should be performed by qualified specialists with the necessary knowledge and experience.

Installation stages: from measurement to commissioning

The installation process includes several key stages:

  1. Opening measurement: at this stage, a specialist visits the site to accurately determine the opening dimensions and the specifics of the plot.
  2. Foundation preparation: for cantilever gates, a concrete base is arranged under the roller carriages; for rail-mounted gates, the guide is concreted.
  3. Manufacturing of sliding gates: based on measurement results, the leaf and necessary components are produced.
  4. Installation of the load-bearing structure: installation of posts, guides, and roller supports.
  5. Leaf installation: attaching the leaf to roller carriages or rollers.
  6. Installation of automation (if necessary): mounting the drive, control unit, photocells and other accessories.
  7. Setup and adjustment: checking smooth movement, setting limit switches and safety system.
  8. Commissioning: briefing the customer on operating and maintenance rules.

PROFI-DOM installers in Almaty carry out work according to technical requirements and safety standards and provide a warranty on the completed installation.

Qualified installation means safety and long-term value. Unprofessional installation can lead to serious problems in the future:

  • Incorrect operation: jamming, skewing, difficult movement of the leaf.
  • Rapid wear of components: incorrect load on structural elements can significantly shorten their service life.
  • Failure of automation: incorrect connection and adjustment of the automatic drive can lead to its breakdown.
  • Safety hazard: improperly installed gates can pose a danger to users.

That is why turnkey sliding gates, where measurement, foundation, installation and adjustment are performed by specialists, save you from extra repair and maintenance costs in the future and ensure safety and comfort of operation.

Care and maintenance: how to extend the life of sliding gates

Proper care and timely maintenance help extend the service life of the gates and preserve their neat appearance.

Recommendations for sliding gate maintenance: simplicity and regularity are the key to durability

  • Regular cleaning: keep the guide rails (on roller gates) and roller carriages (on cantilever gates) clean. Remove dirt, leaves, snow, and ice.
  • Lubrication of moving elements: periodically lubricate the rollers, hinges and other moving parts with special grease.
  • Checking fasteners: regularly check the reliability of fastening of all structural elements. Tighten loosened bolts and nuts.
  • Coating care: monitor the condition of the paint coating. If scratches or chips appear, repair them promptly to prevent corrosion.
  • Checking the automation: regularly test the operation of the automatic drive, photocells and other safety system elements. Faults must be fixed by specialists.

Following these simple recommendations will allow you to keep the gates in excellent condition for many years.

Service maintenance: when to contact specialists

Despite the ease of maintenance, some work is better left to professionals, especially if you have sliding gates with an electric drive:

  • Diagnostics and repair of automation: if problems arise with the automatic drive or control system, you should contact qualified specialists. Self-repair can lead to even greater breakdowns.
  • Travel adjustment: if the gate starts moving unevenly or with effort, adjustment of the roller supports or guides may be required.
  • Replacing worn parts: over time some elements may wear out and need replacement. This is also best entrusted to a specialist.

PROFI-DOM in Almaty provides maintenance and repair of sliding gates: it eliminates faults and carries out preventive servicing. After the warranty period, servicing costs from 20 000 ₸.

Conclusion

Choosing and installing sliding gates in Almaty is a responsible step that requires a careful approach. The type of construction depends on the opening and passage height, the cladding material on the style of the house, and the automation on how often the gates are opened. Qualified installation and regular maintenance keep them in working order for many years.

Frequently asked questions about sliding gates

What does the price of the gates depend on?
The price is formed based on:

  • Dimensions: the greater its height and width, the higher the price;
  • Cladding and forged elements cost more;
  • The mechanism of the structure - with automation costs more;
  • Complexity of gate installation.
How long do manufacture and installation take?
Manufacturing the gates takes from 1- days, depending on complexity and the production workload. With certain types of painting, you will have to wait up to 4-5 days for the paint to dry.
We install gates in any weather. However, it is desirable that there is no rain on the day of installation.

We install gates on a pile foundation in 1 day.
Gates on a concrete foundation with posts are installed in 2-3 days.
Which foundation is better - pile or concrete?
Both types of foundation are good in themselves; they differ only in the installation time of the sliding gates.
If the plot is already landscaped, a screw foundation is far more suitable, since installing it does not require digging a pit and thus spoiling the landscape of a country house.
The cost of a pile foundation will be significantly lower, and it makes it possible to install the gates in a single day.
Is it true that a polymer rack for a sliding gate drive is better than a steel one?
We use a toothed rack made of glass-filled polyamide. It ensures smooth and silent movement of the sliding gate leaf. Moreover, polymer materials are resistant to rain, snow, etc.
How to adjust sliding gates during operation?
Some time after the sliding gates are installed, they may need adjustment. This happens due to weather conditions and the specifics of the site. Our engineers have provided for adjustment of the roller supports and the cable tensioning.
Phone:+7 700 499 59 62Our address:Almaty, Gogol St., 180/2, corner of Isayev St.Daily: 9:00–21:00 (by appointment)